Filtration efficiency (FE), differential pressure (ΔP), quality factor (QF), and construction parameters were measured for 32 cloth materials (14 cotton, 1 wool, 9 synthetic, 4 synthetic blends, and 4 synthetic/cotton blends) used in cloth masks intended for protection from the SARS-CoV-2 virus (diameter 100 ± 10 nm). Seven polypropylene-based fiber filter materials were also measured including surgical masks and N95 respirators. Additional measurements were performed on both multilayered and mixed-material samples of natural, synthetic, or natural-synthetic blends to mimic cloth mask construction methods. Materials were microimaged and tested against size selected NaCl aerosol with particle mobility diameters between 50 and 825 nm. Three of the top five best performing samples were woven 100% cotton with high to moderate yarn counts, and the other two were woven synthetics of moderate yarn counts. In contrast to recently published studies, samples utilizing mixed materials did not exhibit a significant difference in the measured FE when compared to the product of the individual FE for the components. The FE and ΔP increased monotonically with the number of cloth layers for a lightweight flannel, suggesting that multilayered cloth masks may offer increased protection from nanometer-sized aerosol with a maximum FE dictated by breathability (i.e., ΔP).

We report the first mass-specific absorption and extinction cross sections for size- and mass-selected laboratory-generated soot aerosol. Measurement biases associated with aerosols possessing multiple charges were eliminated using mass selection to isolate singly charged particles for a specified electrical mobility diameter. Aerosol absorption and extinction coefficients were measured using photoacoustic and cavity ring-down spectroscopy techniques, respectively, for lacey and compacted soot morphologies. The measurements show that the mass-specific absorption cross sections are proportional to particle mass and independent of morphology, with values between 5.7 and 6 m(2) g(-1). Mass-specific extinction cross sections were morphology dependent and ranged between 12 and 16 m(2) g(-1) for the lacey and compact morphologies, respectively. The resulting single-scattering albedos ranged from 0.5 to 0.6. Results are also compared to theoretical calculations of light absorption and scattering from simulated particle agglomerates. The observed absorption is relatively well modeled, with minimum differences between the calculated and measured mass absorption cross sections ranging from ∼ 5% (lacey soot) to 14% (compact soot). The model, however, was unable to satisfactorily reproduce the measured extinction, underestimating the single-scattering albedo for both particle morphologies. These discrepancies between calculations and measurements underscore the need for validation and refinement of existing models of light scattering and absorption by soot agglomerates.