Organic semiconductors enable the fabrication of a range of lightweight and mechanically flexible optoelectronic devices. Most organic semiconductor lasers, however, have remained rigid until now, predominantly due to the need for a support substrate. Here, we use a simple fabrication process to make membrane-based, substrate-less and extremely thin (<500 nm) organic distributed feedback lasers that offer ultralow-weight (m/A<0.5 gm−2) and excellent mechanical flexibility. We show operation of the lasers as free-standing membranes and transfer them onto other substrates, e.g. a banknote, where the unique lasing spectrum is readily read out and used as security feature. The pump thresholds and emission intensity of our membrane lasers are well within the permissible exposures for ocular safety and we demonstrate integration on contact lenses as wearable security tags.

Optical vortex beams are at the heart of a number of novel research directions, both as carriers of information and for the investigation of optical activity and chiral molecules. Optical vortex beams are beams of light with a helical wavefront and associated orbital angular momentum. They are typically generated using bulk optics methods or by a passive element such as a forked grating or a metasurface to imprint the required phase distribution onto an incident beam. Since many applications benefit from further miniaturization, a more integrated yet scalable method is highly desirable. Here, we demonstrate the generation of an azimuthally polarized vortex beam directly by an organic semiconductor laser that meets these requirements. The organic vortex laser uses a spiral grating as a feedback element that gives control over phase, handedness, and degree of helicity of the emitted beam. We demonstrate vortex beams up to an azimuthal index l = 3 that can be readily multiplexed into an array configuration.

Lead halide perovskites are very promising materials for many optoelectronic devices. They are low cost, photostable, and strongly photoluminescent materials, but so far have been little studied for sensing. In this article, we explore hybrid perovskites as sensors for explosive vapor. We tune the dimensionality of perovskite films in order to modify their exciton binding energy and film morphology and explore the effect on sensing response. We find that tuning from the 3D to the 0D regime increases the PL quenching response of perovskite films to the vapor of dinitrotoluene (DNT)—a molecule commonly found in landmines. We find that films of 0D perovskite nanocrystals work as sensitive and stable sensors, with strong PL responses to DNT molecules at concentrations in the parts per billion range. The PL quenching response can easily be reversed, making the sensors reusable. We compare the response to several explosive vapors and find that the response is strongest for DNT. These results show that hybrid perovskites have great potential for vapor sensing applications.

Organic semiconductors enable the fabrication of a range of lightweight and mechanically flexible optoelectronic devices. Most organic semiconductor lasers, however, have remained rigid until now, predominantly due to the need for a support substrate. Here, we use a simple fabrication process to make membrane-based, substrate-less and extremely thin (<500 nm) organic distributed feedback lasers that offer ultralow-weight (m/A<0.5 gm −2 ) and excellent mechanical flexibility. We show operation of the lasers as free-standing membranes and transfer them onto other substrates, e.g. a banknote, where the unique lasing spectrum is readily read out and used as security feature. The pump thresholds and emission intensity of our membrane lasers are well within the permissible exposures for ocular safety and we demonstrate integration on contact lenses as wearable security tags.

Trace sensing of explosive vapours is a method in humanitarian demining and Improvised Explosives Device (IED) detection that has received increasing attention recently, since accurate, fast, and reliable chemical detection is highly important for threat identification.However, trace molecule sampling in the field can be extremely difficult due to factors including weather, locale, and very low vapour pressure of the explosive. Preconcentration of target molecules onto a substrate can provide a method to collect higher amounts of analyte for analysis. We used the commercial fluoropolymer Aflas as a preconcentrator material to sorb explosive molecules to the surface, allowing subsequent detection of the explosives via the luminescence quenching response from the organic polymer Super ACCEPTED MANUSCRIPTHighlights  Trace detection of explosive vapours is challenging in real-world environments. By "preconcentrating" trace vapours onto solid substrates, higher amounts can be collected for detection. Our approach combines fluoropolymer preconcentrators, free-flying honeybees for sampling, and luminescent thin films as the sensing mechanism. The inexpensive, commercially-available fluoropolymer Aflas has shown good preconcentration abilities for 2,4-DNT which is typically found in landmines. Laboratory results and initial field results indicate this method is a very promising tool for the detection of trace explosive vapours in contaminated land.