Printed photovoltaics promise lightweight and flexible light harvesting devices for conformal integration into buildings, portable electronics or vehicles. This is enabled by employing thin photoactive layers, which can reduce the use of sometimes costly and scarce absorber materials. Since this in turn comes along

We present in-coupling gratings for improving the performance of thin film organic solar cells. The impact of the grating on the absorption in the active layer is modeled and explained using a standard cell architecture. An increase in absorption of 14.8% is predicted and is shown to be independent from the active material. The structure is then applied on blade-coated devices and yields an efficiency improvement of 12%. The angular behavior of the structures is measured showing superior performance for two dimensional gratings. By simulating the current generation for different angles and illumination conditions, we predict a total yearly increase of the generated current of 12% using an optimized grating. The fabrication of these structures, moreover, is compatible with roll-to-roll production techniques, thus making them an optimal solution for printed photovoltaics.

Solution processable organic tandem solar cells offer a promising approach to achieve cost-effective, lightweight and flexible photovoltaics. In order to further enhance the efficiency of optimized organic tandem cells, diffractive light-management nanostructures were designed for an optimal redistribution of the light as function of both wavelength and propagation angles in both sub-cells. As the fabrication of these optical structures is compatible with roll-to-roll production techniques such as hot-embossing or UV NIL imprinting, they present an optimal cost-effective solution for printed photovoltaics. Tandem cells with power conversion efficiencies of 8-10% were fabricated in the ambient atmosphere by doctor blade coating, selected to approximate the conditions during roll-to-roll manufacturing. Application of the light management structure onto an 8.7% efficient encapsulated tandem cell boosted the conversion efficiency of the cell to 9.5%.

No abstract

Chronic wounds represent a significant burden to patients, health care professionals, and health care systems, affecting over 40 million patients and creating costs of approximately 40 billion € annually. We will present a medical device for photo-stimulated wound care based on a wearable large area flexible and disposable light management system consisting of a waveguide with incorporated micro-and nanometer scale optical structures for efficient light in-coupling, waveguiding and homogeneous illumination of large area wounds. The working principle of this innovative device is based on the therapeutic effects of visible light to facilitate the self-healing process of chronic wounds. On the one hand, light exposure in the red (656nm) induces growth of keratinocytes and fibroblasts in deeper layers of the skin. On the other hand, blue light (453nm) is known to have antibacterial effects predominately at the surface layers of the skin. In order to be compliant with medical requirements the system will consist of two elements: a disposable wound dressing with embedded flexible optical waveguides for the light management and illumination of the wound area, and a non-disposable compact module containing the light sources, a controller, a rechargeable battery, and a data transmission unit. In particular, we will report on the developed light management system. Finally, as a proof-of-concept, a demonstrator will be presented and its performances will be reported to demonstrate the potential of this innovative device.View presentation recording on the SPIE Digital Library: http://dx.