The present project studied the signal drift in liquid chromatography tandem mass spectrometry (LC-MS/MS) and proposed a strategy for compensating such drift. In the study, four 4-component groups were repeatedly run on different LC-MS/MS systems for over 12 h to investigate the dependence of signal drift on time and hardware systems. The 4-component groups each consisted of (1) an analyte, (2) a stable isotope labeled analyte, (3) a compound with similar structure to the analyte, and (4) a compound with dissimilar structure. All of the species showed significant signal drift, generally more than 25% over 12 h. The analyte and its stable isotope labeled analog always have the same drifting pattern including the trends and direction from one LC-MS/MS system to another. Signal drift was also found to be concentration dependent. Our experiments further proved that a conventional stable isotope labeled internal standard in LC-MS/MS quantification would not compensate the variations caused by concentration-dependent signal drift. An ideal internal standard for LC-MS/MS has both identical structure and similar concentration to the analyte. For that, we proposed a new internal standard strategy, pseudo internal standard (Pseudo IS), for LC-MS/MS quantification. Pseudo IS could effectively compensate signal drift in spite of its significant time, system, and concentration dependencies.

Liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) has become an indispensable tool for bioanalysis. To quantify a small molecule with LC-MS/MS, a stable isotope-labeled analyte is routinely used as the internal standard. However, cross signal contributions between the analyte and its stable isotope labeled internal standard (SIL-IS) could cause problems when the signal response of the LC-MS/MS system is nonlinear. In the present work, we try to illustrate how the “cross talk” between the analyte and its SIL-IS may cause problems for a nonlinear system. We assume that the instrumental responses toward the analyte and its SIL-IS are the same. When the calibration curve is nonlinear, the addition of a SIL-IS would practically move the response of the analyte up along the parabolic line causing a change in the signal strength of the analyte (usually decrease). The more the SIL-IS is added, the larger change the analyte signal would become. Such a problem would only be corrected by making the calibration curve linear. To this end, we proposed a component equation (CE) as the calibration for nonlinearity correction. In this study, we contrasted the accuracy of CE with the common quantitative method using two drugs whose mass spectrometric responses are linear and nonlinear, respectively. The acceptable accuracy results demonstrated that the CE calibration was comparable with the regular quantitative SIL-IS method with a proper weighting factor and much better than that without weighting. Therefore, CE calibration may provide another reliable way for LC-MS/MS quantification.

Surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS) has gained increased attention in the metabolic characterization of human biofluids. However, the stability and reproducibility of nanoparticle-based substrates remain two of the biggest challenges in high-salt environments. Here, by controlling the extent of Coulomb repulsion of 26 nm positively charged AuNPs, a homogeneous layer of covalently bonded AuNPs on a coverslip with tunable interparticle distances down to 16 nm has been successfully fabricated to analyze small biomolecules in human serum. Compared with the self-assembled AuNP array, the covalently bonded AuNP array showed superior performances on stability, reproducibility, and sensitivity in high-salt environments. The stable attachment of AuNPs maintained a detection reproducibility with a RSD less than 12% and enabled the reusability of the array for 10 experiments without significant signal deterioration (<15%) and carryover effects. Moreover, the closely positioned AuNPs allowed the coupling of photoinduced plasmons to generate an enhanced electric field, which promotes the generation of excited electrons to facilitate the desorption/ionization processes instead of the heat dissipation, thus enhancing the detection sensitivity with detection limits down to the femtomole level. Combined with machine learning methods, the AuNP array has been successfully applied to discover seven biomarkers for differentiating early-stage lung cancer patients from healthy controls. It is anticipated that this simple approach of developing robust AuNP arrays can also be extended to other types of NP arrays for wider applications of SALDI-MS technology.

Electrospray ionization mass spectrometry (ESI-MS) is widely used in drug development, therapeutic drug monitoring, and other fields. However, unstable mass spectral signals, especially during the initial stages of instrument operation, plague analysts. Generally, in quantitative experiments, the stability of response can be achieved by running the analytical system for some time. However, the equilibration time required for the responses of different compounds to stabilize has been elusive. To investigate the response stability of the ESI-MS system, 72 compounds with different physicochemical properties were employed on three systems, and flow injection analysis was performed in positive ion mode. With the use of 5.00% (response stable factor, RSF) as the stability limit, about 80% of the compounds were stable within 60 min. Under a 2.00% criterion, the stabilization time was significantly longer. The stabilization time varies with different instruments and physicochemical properties of the compounds. When positive ion detection is performed in an acidic mobile phase, the octanol–water partition coefficient (Log P), molecular weight, and molar volume can all affect the time required to stabilize the response. In general, it is necessary to balance the ESI-MS system for an appropriate time before sample detection, especially for the analysis of compounds with strong hydrophilicity, small molecular weight, or small molar volume under the conditions above.

No abstract