The work is aimed at studying corrosion and fatigue properties of aluminum alloys by means of acoustic emission (AE). During material degradation are acoustic events scanned and evaluated. The main objective of the article is a description of behavior of aluminum alloys degraded in specific conditions and critical degradation stages determination. The first part of the article describes controlled degradation of the material in the crypto–conditions. The acoustic emission method is used for process analyzing. This part contains the AE signals assessment and comparing aluminium alloy to steel. Then the specimens are loaded on high-cyclic loading apparatus for fatigue life monitoring. Also, the synergy of fatigue and corrosion processes is taken into account.The aim is the description of fatigue properties for aluminum alloys that have already been corrosion-degraded. Attention is also focused on the structure of fatigue cracks. The main part of the article is aimed at corrosion degradation of aluminium alloys researched in real time by means of AE. The most important benefit of AE detection/recording is that it provides information about the process in real time. Using this measurement system is possible to observe the current status of the machines/devices and to prevent serious accidents.

The aim of this study was to investigate the suitability of a novel electrospun polyurethane nanofibre material for water-treatment purposes. Bacterial removal efficiency was tested in the laboratory by filtering artificial water spiked with Escherichia coli through a 0.25 µm nanofibre membrane. The results were compared with those obtained using a commercial microfiltration material (MV020T) with a similar pore size (0.20 µm). Alongside the laboratory experiments, we also determined filtration efficiency with semi-pilot scale experiments using actual wastewater from the secondary sedimentation tank of a wastewater treatment plant. The laboratory experiments indicated very high log10 removal efficiency, ranging from 5.8 to 6.8 CFU (colony-forming units)/ml. These results were better than those of the commercial membrane (3.8-4.6 CFU/ml). The semi-pilot scale experiment confirmed the membrane's suitability for microbial filtration, with both E. coli and total culturable microorganisms (cultured at both 22 and 36 °C) showing a significant decline compared to the non-filtered control (wastewater from the secondary outlet).

No abstract

Abstract. Procedures permitting to prepare homogeneous functionalized nanofibre structures based on polyurethanes modified by phthalocyanines (PCs) by employing a suitable combination of variables during the electrospinning process are presented. Compared are filtration and bacteria deactivation properties of open and planar nanostructures with PCs embedded into polyurethane chain by a covalent bond protecting the release of active organic compound during the filtration process. Finding that the morphology of functionalized nanofibre structures have an effect on bacterial growth was confirmed by microbiological and physico-chemical analyses, such as the inoculation in a nutrient agar culture medium and flow cytometry.