The high awareness of intensification and frequency of smog phenomenon all over the world in XXI age makes for detailed analyses of the reasons of its formation and prevention. The governments of the developed countries and conscious of real hazards, including many European countries, aim to restrict the emission of harmful gases. In literature, we can find the discussions on the influence of this phenomenon on the health and life of inhabitants of contaminated areas. Some elaborations of prognostic models, descriptions of pollution sources, the manner of their restriction, and the analysis of causal-consecutive correlation are also popular. The influence of pollutions resulting from the operation of vehicles, planes, and the industry are well described. However, every machine and device which is driven with a combustion engine has the effect on the general level of anthropogenic pollutions. These drives are subject of different regulations limiting their emission for service conditions and applications. One of the groups of such machines described in European and American regulations is non-road mobile machinery. The aim of this paper is the presentation of the problem of weak analysis and application of engineering and technological tools for machinery drive emission, despite of many publications on hazards and problems of emission. These machines have the influence on both the increase of global contamination and the machine users. The regulations of the European Union take into consideration the generated hazards and restrict the emission of machine exhaust gases by approval tests—these regulations are continually improved, and the effects of these works are new emission limits in 2019. However, these activities seem to be liberal as opposed to limits of the emission for passenger and goods vehicles where the technological development of the construction is greater and the regulations are the most rigorous. During the analysis of the development of non-road mobile machinery in the correlation with automotive vehicles, we can indicate engineering and technological solutions which are limiting the emission of non-road mobile machinery, but which are not applied. Due to liberal regulations for this group of machinery, the producers do not apply innovative solutions which can be found in road vehicles. The paper presents the synthetic review of existing EU regulations concerning limits of the emission of harmful exhaust gases which are generated by spark-ignition combustion engines of non-road mobile machinery. The authors show the divergences between the limits of the emission of harmful exhaust gases generated by road vehicles and non-road mobile machinery (boats and railway engines are not taken into account). The authors present the directions of the development of the combustion process control and systems limiting the emission of harmful exhaust gases. High innovative automotive industry was indicated as the direction of the development for limiting the influence of the emission on the environment by non-ro...
The widespread application of both gear wheels and cogbelt pulleys with noncircular generating line in technique stimulates the development of manufacturing and measuring methods of these wheels. The paper presents the rapid prototyping methods of models of cogbelt pulleys with nocircular evelope. Evaluation method of manufacturing accuracy of cogbelt pulleys, which are applied in unevenrunning belt transmissions, are presented. These transmissions are widely applied in steering techniques and drives of machines and devices. Verification of mapping accuracy of shape of geometrical model of cogbelt pulley was done with the application of noncontact optical system i.e. coordinate optical scanner GOM Atos Compact Scan 5M GOM company.
The paper presents the analysis of reasons, form and wear of elements of V-belt transmission. Syndromes of loss of driving properties for chosen wheels and V-belts are specified. Methodology of failure evaluation of wheels and V-belts with the application of optical microscope is proposed. The applied measuring set allows for universal analysis of the measurement results. Operation principle of this device and its measuring and analysing abilities are shown. Failures of chosen V-belts and the influence of these failures on accuracy of kinematic features of chosen driving units are evaluated.
Carrying out a realistic research on working units of machines that grinder waste coming from tree and bush trimming requires designing machines that would be more efficient. It is neccesary both to introduce the analysis of already existing solutions as well as searching for innovative ones that would result in the increase of efficiency, lowering the costs and time needed as well as lower exhaust emission into the atmosphere. The results presented below will be used for the following purposes: the analysis of grinding process that supplies data to cunstruct simulating models that reflect the real working conditions of grinding machines. The results of the experiments will allow to estimate the influence of construction featrures, including the ones connected with automatisation. The importance of the carried out research is also applicable to the analisys of influence of grinding process on the form of flakes that result from the process, energy consumption. It also allows to make conclusions leading to the improvement of the processes that use grinded mass.The construction specifity of ths kind of machines and their working principles results from the fact, that the cutting process they perform concerns orthotropic plant material that has inhomogenic structure and physical-chemical properties requires further analysis. The article presents the construcion of a research stand designed to record the characteristisc of changes of the torque and rotation speed of working unit of mill chopper type MQS2800 Macalister. The introductory research results presented below point out that depending on the position of the sample (along the grain) against the mill chopper significantly influences on the form of generated changes of the torque. The research stand that has been designed and constructed allows the analysis of both construction features of the chopper as well via the assessment of grinding process also separte paremeters of processed wood.
Multiple grooved pulley wear can be evaluated by using two methods, coordinate method and optical method. This paper presents the results of the research and the analysis of the geometrical features for this type of pulleys, which was obtained with the ATOS II optical system. In this method the evaluation of wear is made based on the comparison of the manufactured parts or assemblies with superimposing the CAD model and the surface model obtained from digitization. Existing differences can be easily determined by their visualization in the form of a colored map of deviations or profile differences. This method is subject to a methodological error, which is a result of the accuracy of the scan and the correctness of the model's fit. Optical techniques can be used to determine the accuracy of the geometric features for products made with any shaping technique (machining, plastic processing, incremental methods, etc.).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.