Passive all-weather windows, capable of selectively transmitting visible and infrared solar radiation, could help in bringing down fossil-fuel energy consumption globally by reducing the carbon footprint of typical air-conditioning systems for buildings and motor vehicles. Here, we report on designing metal–insulator–metal thin-films for application in passive windows, optimized for different climatic conditions. We analyze designs comprising different noble metals as well as their relatively inexpensive alternatives. By finding an optimal choice of materials and thicknesses of the metal and dielectric layers, our lithography-free simple design can provide all-weather solutions for passive windows with desired visible and infrared transmission/blocking capability. Obtained theoretical results agree well with full-wave simulations. Thus, our proposed designs enable developing low-cost, ultra-thin (thickness: 47–85 nm), polarization-independent, angle-insensitive (up to 83 deg), and large-area-compatible passive windows with improved solar-radiation control for different weather/climatic conditions. The figure-of-merit calculation shows that the relatively inexpensive metals used in our passive glasses can outperform industry-standard commercial glasses and previously reported infrared-blocking plasmonic glasses.

No abstract

Magnetic resonance imaging (MRI) is a widely used clinical diagnostic tool, which is based on the principle of nuclear magnetic resonance of hydrogen atoms in human body. The Larmor frequency of precession of the hydrogen atoms is determined by the strength of static magnetic field ( B0) of MRI. A higher B0 can directly improve signal-to-noise ratio (SNR) of MRI. However, this method involves expensive hardware installation, which could have adverse effects of tissue-heating and make MRI unsafe for patients with medical implants. Hence, efforts have been made to increase the SNR of MRI without increasing B0. An effective solution in this direction would be to boost the radiofrequency (RF) magnetic fields emitted by the body part undergoing scan, particularly by using metamaterials. The higher the received RF signal strength, the greater the SNR of MRI. For a metamaterial to be used as an “add-on” in commercial scanners, its dimensions need to be designed appropriately so that it fits in the available gap between the transceiver coil and the human body. In this article, a 10-mm-thick metallo-dielectric metamaterial is designed by a stacking of alternate square-shaped capacitive patches and inductive apertures for enhancing the RF magnetic flux density and hence, the SNR of a 1.5 T MRI system. The inter-layer electromagnetic coupling in the stacked structure is deployed for spatial localization of magnetic fields at the resonant frequency (∼64 MHz) which is equal to the Larmor frequency of 1.5 T MRI. An equivalent circuit model, comprising a lumped-element third order bandpass filter, validated the transmissivity characteristics of the metamaterial obtained using full-wave simulations. Magnetic flux density enhancement by a factor of 55 is obtained when the metamaterial add-on is placed between a surface coil and a bio-model of human head.

No abstract

No abstract