Real-time glucose monitoring conventionally involves non-bioresorbable semi-implantable glucose sensors, causing infection and pain during removal. Despite bioresorbable electronics serves as excellent alternatives, the bioresorbable sensor dissolves in aqueous environments with interferential biomolecules. Here, the theories to achieve stable electrode potential and accurate electrochemical detection using bioresorbable materials have been proposed, resulting in a fully printed bioresorbable electrochemical device. The adverse effect caused by material degradation has been overcome by a molybdenum-tungsten reference electrode that offers stable potential through galvanic-coupling and self-compensation modules. In vitro and in vivo glucose monitoring has been conducted for 7 and 5 days, respectively, followed by full degradation within 2 months. The device offers a glucose detection range of 0 to 25 millimolars and a sensitivity of 0.2458 microamperes per millimolar with anti-interference capability and biocompatibility, indicating the possibility of mass manufacturing high-performance bioresorbable electrochemical devices using printing and low-temperature water-sintering techniques. The mechanisms may be implemented developing more comprehensive bioresorbable sensors for chronic diseases.

No abstract

In situ fabrication of wearable devices through coating approaches is a promising solution for the fast deployment of wearable devices and more adaptable devices for different sensing demands. However, heat, solvent, and mechanical sensitivity of biological tissues, along with personal compliance, pose strict requirements for coating materials and methods. To address this, a biocompatible and biodegradable light-curable conductive ink and an all-in-one flexible system that conducts in situ injection and photonic curing of the ink as well as monitoring of biophysiological information have been developed. The ink can be solidified through spontaneous phase changes and photonic cured to achieve a high mechanical strength of 7.48 MPa and an excellent electrical conductivity of 3.57 × 10 5 S/m. The flexible system contains elastic injection chambers embedded with specially designed optical waveguides to uniformly dissipate visible LED light throughout the chambers and rapidly cure the ink in 5 min. The resulting conductive electrodes offer intimate skin contact even with the existence of hair and work stably even under an acceleration of 8 g, leading to a robust wearable system capable of working under intense motion, heavy sweating, and varied surface morphology. Similar concepts may lead to various rapidly deployable wearable systems that offer excellent adaptability to different monitoring demands for the health tracking of large populations.

Magnetic resonance imaging (MRI)–safe implantable wireless energy harvester offers substantial benefits to patients suffering from brain disorders, hearing impairment, and arrhythmias. However, rigid magnets in cutting-edge systems with limited numbers of rotation axis impose high risk of device dislodgement and magnet failure. Here, a flexible omnidirectional rotating magnetic array (FORMA) and a flexible MRI-safe implantable wireless energy-harvesting system have been developed. Miniaturized flexible magnetic balls 1 millimeter in diameter achieved by molding three-dimensional printed templates can rotate freely in elastomer cavities and supply a magnetic force of 2.14 Newtons at a distance of 1 millimeter between an implantable receiver and a wearable transceiver. The system can work stably under an acceleration of 9 g and obtain a power output of 15.62 decibel milliwatts at a transmission frequency of 8 megahertz. The development of the FORMA may lead to life-long flexible and batteryless implantable systems and offers the potential to promote techniques for monitoring and treating acute and chronic diseases.