No abstract

This thesis does thermal gravimetric analysis（TGA）studies on Chinese fir sawdust biomass by integrated thermal analyzer under vacuum conditions. Through the analysis on lostmass curve at different heating rate of 10, 15, 20 and 30°C/min, we found the process of Chinese fir sawdust vacuum pyrolysis can be mainly divided into three stages: evaporation of free water and combined water desorption, rapid lostmass of pyrolysis and slow decomposition of residues. The lostmass major temperature range is between 250 ~ 450°C, the peak temperature is between 365 ~ 400°C. When the pyrolysis temperature is 500°C, vacuum pyrolysis reaction of Chinese fir sawdust has basically completed. As the heating rate rises, the lostmass curve is moving to the right, the peak temperature is shifting to higher temperature, and the temperature range of thermal decomposition reaction widens significantly. According to experimental datas, we tried to obtain the vacuum pyrolysis dynamic parameters of Chinese fir sawdust, and the results are that the apparent activation energy of vacuum pyrolysis reaction of Chinese fir sawdust biomass is 128.34kJ/mol, with the pre-exponential factor being 6.42×109 and reaction order being 1.08, similar to first order reaction.

To prepare ultra-fine particles and offer correlative applications such as the micronization of drugs with rapid expansion of supercritical solution (RESS), the first work in measuring the solubility of risocaine has been carried out at different operation conditions in this paper. The trend of solubility due to changes in specific operational parameters has been examined. The results of pressure (9-30 MPa) and temperature (308-328K) effecting on solubility show that the solubility increases mainly along with the increasing density. With applying different models to correlate the solubility data, we found Chrastil models had better correlation effects than the Peng Robinson EOS model, Mendez-Santiago and Teja equation model, with providing a nearly perfect average absolute relative deviation (AARD) of 0.0596. In the second part of work, RESS was applied to prepare risocaine particles at five different process conditions, including extraction temperature (308-328K), extraction pressure (9-30MPa), nozzle temperature (100-120°C), nozzle diameter (0.1-0.4nm) and spray distance (2-4cm).The size and morphology were determined by scanning electron microscopy (SEM). On the basis of the different experimental operation conditions, granular, filmily and threadlike particles with diameter (1-100nm) were obtained, it was also demonstrated that a successful size reduction of risocaine particles.

The activated carbon-containing catalysts (Pd/C and Pt/C) have been prepared by surface modification of the activated carbon with palladium chloride and chloroplatinic acid solution, respectively. The Pt/C catalyst is characterized by XRD pattern. The glyphosate is prepared from catalytic oxidation N-phosphonomethyl iminodiacetic acid. Effect of different catalysts and amount of the catalyst in catalytic oxidation are investigated. Compared with Pt/C catalyst, Pd/C catalyst is more active. Optimum amount of Pd/C catalyst is 45 mol/m3 PMIDA.

The quantitative area risk assessment (QARA) are definitted based on the characteristics of the area risk assessment, and the model of the QARA are proposesed. Based on the accident consequences analysis method and the theory of grey correlation, it presents the risk correlation analysis method which is used to analysis the risk correlation value between the projects, and discusses the grading method of the risk correlation according to the smooth handling idea. The practical applying results show that the theory of risk correlation has a good practical in QARA.