In this study, we separately used a laboratory Hollander beater, a pilot scale 12″ single-disc refiner and an expanded trial with a commercial paper mold mill to investigate the feasibility of using thermal-alkali/enzyme pretreated rice straw semi-chemical mechanical pulp to substitute portions of old corrugated carton board (OCC) pulp in the paper industry. In the laboratory plan, sequential treatments of NaOH at a 5–10% dosage and enzymes at a 0.2–4% dosage were applied to rice straw, followed by beating using a Hollander beater for 1–2 h to complete the rice straw semi-chemical mechanical pulping process. When the NaOH dosage, enzyme dosage and refining time were 10%, 0.2% and 1 h, the best quality rice straw pulp was obtained. Along with the increase in NaOH dosage, the pulp freeness decreased significantly, and the pulp accepted rate increased. Enzymatic treatment enhanced rice straw quality only after NaOH dosage treatment, which then reacted with rice straw to increase the quality of pulp. In the expanded trial, the rice straw semi-chemical mechanical pulp was blended with OCC pulp (0%, 25%, 50%, 75% and 100%) to form handsheets. Along with an increase in rice straw proportions, the tensile index, burst index, and ring-crush index increased by 109–200%, 13–196%, and 124–187%, respectively. In an online commercial paper mold mill trial, blending rice straw pulp with OCC could successfully make paper-mold egg cartons, with both mill operation and product smoothness appearance being highly acceptable.

This study examined the chemical composition and antimicrobial activities of essential oils isolated from the leaves, twigs, and fruits of Neolitsea sericea var. aurata from Taiwan. The major compounds responsible for antimicrobial activity were isolated and identified. The leaf, twig, and fruit essential oils were obtained through hydrodistillation in a Clevenger-type apparatus and were characterized through gas chromatography (GC) with flame ionization detection (GC/FID) and GC/mass spectrometry (GC/MS). The major compounds were ( E)-β-ocimene (49.3%) and sericenine (31.6%) in the leaf oil; ( E)-β-ocimene (73.7%), α-cadinol (6.8%), and α-muurolol (4.0%) in the twig oil; and ( E)-β-ocimene (84.7%) in the fruit oil. The twig oil exhibited the strongest antibacterial and antifungal activities. We isolated α-cadinol and α-muurolol, the main components of NTO4 fraction, and used them in antimicrobial tests; the two compounds exhibited excellent antimicrobial activities. The twig essential oil contains α-cadinol and α-muurolol and exhibited excellent antimicrobial activities against food-borne pathogens; thus, they are worthy of further research and development.

In this study, we attempted to investigate factors affecting the cockling of Chinese hanging scrolls from several practical aspects. From the experimental results, we found that artworks become more stable if they remain attached to a drying board for more than a month. After 3 months, they are nearly completely unaffected by changes in atmospheric humidity in the display space. Trimming the mounting silk in a direction either parallel or perpendicular to the weft makes a difference in the degree of cockling. If the lateral sides and top and bottom weft are perpendicular to the artwork height, the mounted artwork will cockle more than twice as much as when the weft of the painting as well as the top, bottom, and side borders are cut in the same direction. Artwork with a dry last backing mount will cockle less and have a more-uniform cockle height than that with a seated last backing mount. Regardless of whether a dry or seated backing mount is used, artwork that is attached to a drying board a second time will cockle less than one attached to a drying board only once. Waxing and stone polishing can also reduce the degree of cockling.

No abstract