Multiple antenna technologies have attracted much research interest for several decades and have gradually made their way into mainstream communication systems. Two main benefits are adaptive beamforming gains and spatial multiplexing, leading to high data rates per user and per cell, especially when large antenna arrays are adopted. Since multiple antenna technology has become a key component of the fifth-generation (5G) networks, it is time for the research community to look for new multiple antenna technologies to meet the immensely higher data rate, reliability, and traffic demands in the beyond 5G era. Radically new approaches are required to achieve orders-of-magnitude improvements in these metrics. There will be large technical challenges, many of which are yet to be identified. In this paper, we survey three new multiple antenna technologies that can play key roles in beyond 5G networks: cellfree massive MIMO, beamspace massive MIMO, and intelligent reflecting surfaces. For each of these technologies, we present the fundamental motivation, key characteristics, recent technical progresses, and provide our perspectives for future research directions. The paper is not meant to be a survey/tutorial of a mature subject, but rather serve as a catalyst to encourage more research and experiments in these multiple antenna technologies. Index Terms-Beyond 5G, cell-free massive MIMO, beamspace, intelligent reflecting surface. I. INTRODUCTION T HE demand for higher data rates and traffic volumes seems to be never-ending, thus the quest for delivering The work of J.

No abstract

The practical deployment of massive multiple-input multiple-output (MIMO) in future fifth generation (5G) wireless communication systems is challenging due to its high hardware cost and power consumption. One promising solution to address this challenge is to adopt the low-resolution analogto-digital converter (ADC) architecture. However, the practical implementation of such architecture is challenging due to the required complex signal processing to compensate the coarse quantization caused by low-resolution ADCs. Therefore, few high-resolution ADCs are reserved in the recently proposed mixed-ADC architecture to enable low-complexity transceiver algorithms. In contrast to previous works over Rayleigh fading channels, we investigate the performance of mixed-ADC massive MIMO systems over the Rician fading channel, which is more general for the 5G scenarios like Internet of Things (IoT).Specially, novel closed-form approximate expressions for the uplink achievable rate are derived for both cases of perfect and imperfect channel state information (CSI). With the increasing Rician K-factor, the derived results show that the achievable rate will converge to a fixed value. We also obtain the powerscaling law that the transmit power of each user can be scaled down proportionally to the inverse of the number of base station (BS) antennas for both perfect and imperfect CSI. Moreover, we reveal the tradeoff between the achievable rate and energy efficiency with respect to key system parameters including the quantization bits, number of BS antennas, Rician K-factor, user transmit power, and CSI quality.Finally, numerical results are provided to show that the mixed-ADC architecture can achieve a better energy-rate trade-off compared with the ideal infinite-resolution and low-resolution ADC architectures. Achievable rate, mixed-ADC receiver, massive MIMO, Rician fading channels. Index Terms

Nowadays, millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems is a favorable candidate for the fifth generation (5G) cellular systems. However, a key challenge is the high power consumption imposed by its numerous radio frequency (RF) chains, which may be mitigated by opting for low-resolution analog-to-digital converters (ADCs), whilst tolerating a moderate performance loss. In this article, we discuss several important issues based on the most recent research on mmWave massive MIMO systems relying on low-resolution ADCs. We discuss the key transceiver design challenges including channel estimation, signal detector, channel information feedback and transmit precoding. Furthermore, we introduce a mixed-ADC architecture as an alternative technique of improving the overall system performance. Finally, the associated challenges and potential implementations of the practical 5G mmWave massive MIMO system with ADC quantizers are discussed.

The low-resolution analog-to-digital convertor (ADC) is a promising solution to significantly reduce the power consumption of radio frequency circuits in massive multiple-input multiple-output (MIMO) systems. In this letter, we investigate the uplink spectral efficiency (SE) of massive MIMO systems with low-resolution ADCs over Rician fading channels, where both perfect and imperfect channel state information are considered. By modeling the quantization noise of low-resolution ADCs as an additive quantization noise, we derive tractable and exact approximation expressions of the uplink SE of massive MIMO with the typical maximal-ratio combining (MRC) receivers. We also analyze the impact of the ADC resolution, the Rician K-factor, and the number of antennas on the uplink SE. Our derived results reveal that the use of low-cost and low-resolution ADCs can still achieve satisfying SE in massive MIMO systems.Index Terms-Analog-to-digital convertor (ADC), massive MIMO, Rician fading channels, spectral efficiency.