No abstract

Millimeter-Wave (mmWave) antennas for 5G mobile terminals require a wide bandwidth, large-angle beam scanning, low-profile design, and multi-substrate compatibility for module-level integration. In this paper, we propose one candidate design employing a patch structure with the shorting pin to particularly generate extra zero modes. By taking advantages of the 2 nd zero-mode with the TM 01 mode, we can obtain a wide bandwidth covering 23.5∼28 GHz, a large-angle beam scanning with ±60 • , as well as keep the substrate as low profile as 0.508 mm. Thanks to the zero-mode induced patch-type design, it is compatible to multi-layer configuration possessing the extensibility and flexibility for further module design. We experimentally valid the design of a 4 × 2 array with multi-layer configuration in a cell phone environment. Good RF performances with ±60 • scanning in the wide bandwidth indicate this proposed design can be an appropriate candidate for 5G mobile terminals. INDEX TERMS 5G mmWave, patch antenna, shorting pin, mobile terminals, beam scanning.

No abstract

Electrodynamics theory tells that EM waves are generated from accelerated charged particles. Conventional radiators such as antennas are understood to emit waves because of the current's distribution and accumulation in the capacitor, where electrons are accelerated. In MEMS mechanisms, charges can be accelerated by the mechanical motion, which suggests that an MEMS structure can also be a radiator. The electrodynamics to theoretically analyse the EM wave radiation from MEMS is used. During the electrostatic nonlinear pull-in instability MEMS, where the electrostatic gap has become narrower than the 2/3 of the initial gap, the distributed charges are accelerated at a very high rate so as to generate significant power radiation in the form of EM waves. The MEMS's mechanical accelerations are analysed to calculate the transient radiations in both spatial and frequency domains.

No abstract