The conventional Doppler laser-interference velocimeters are made up of traditional optical elements such as lenses and mirrors and will generally restrict its applications in multipoint velocity measurements. By transfering the light from multimode optical fiber to single-mode optical fiber and using the currently available conventional telecommunications elements, the authors have constructed a velocimeter called all-fiber displacement interferometer system for any reflector. The unique interferometer system is only made up of fibers or fiber-coupled components. The viability of this technique is demonstrated by measuring the velocity of an interface moving at velocity of 2133m∕s with 50ps time resolution. In addition, the concept of optical-fiber mode conversion would provide a way to develop various optical-fiber sensors.

Knowledge of the sound velocity of core materials is essential to explain the observed anomalously low shear wave velocity (VS) and high Poisson’s ratio (σ) in the solid inner core. To date, neither VS nor σ of Fe and Fe-Si alloy have been measured under core conditions. Here, we present VS and σ derived from direct measurements of the compressional wave velocity, bulk sound velocity, and density of Fe and Fe-8.6 wt%Si up to ~230 GPa and ~5400 K. The new data show that neither the effect of temperature nor incorporation of Si would be sufficient to explain the observed low VS and high σ of the inner core. A possible solution would add carbon (C) into the solid inner core that could further decrease VS and increase σ. However, the physical property-based Fe-Si-C core models seemingly conflict with the partitioning behavior of Si and C between liquid and solid Fe.

A compact all-fiber displacement interferometer (AFDI) system, working at 1550 nm, has been developed and tested, and its working fundamentals will be introduced in this letter. In contrast with other models of fiber-optic velocity interferometer system, AFDI adopts a single-mode optic fiber pigtail as the detect head, diameter of which is only 1 mm, to collect directly the reflect laser beam from the moving surface, which makes this instrument have some unique advantages in observing the point movements of a small flyer. Preliminary experiments using this instrument to measure the velocity history of a small aluminum thin foil driven by a nanosecond pulse laser were conducted successfully, the precise velocity history profile deduced from the sharp interference fringes and the nanometer resolution in displacement gives an eloquent proof of its eminent abilities. The field depth (approximately 2 mm) of our AFDI is a little smaller than the DISAR [Weng et al., Appl. Phys. Lett. 89, 111101 (2006)] system, but its compact structure makes it much convenient to operate. Further applications for multipoints velocity history measurements of small targets are under consideration.

A new all-fiber velocity interferometer system for any reflector (AFVISAR) was developed. It was conceived and realized with the purpose of using it as the basic measuring element of a complete system for multiple point velocity measurements. Its main features are that it works at 532nm and partly adopts the multimode optical fiber. The velocimeter consists of only fibers or fiber coupled components and has no optic elements such as optic lenses or reflectors. It is therefore very compact and easy to operate. Unlike the conventional AFVISAR, which uses single-mode optic fiber components, the laser beam in this new interferometer system arrives at and reflects from the target surface through a multimode optical fiber component, and then enters and interferes in a [3×3] single-mode fiber coupler. Its working principle is elaborated on in this article. Preliminary experiments using a split Hopkins pressure bar (SHPB) device show that the new interferometer can successfully measure the velocity profiles of the metal specimen along the axial or radial direction. Further experiments on a one-stage gas gun are under consideration.

A new optical-fiber frequency domain interferometer (OFDI) device for accurate measurement of the absolute distance between two stationary objects, with centimeter measuring range and nanometer resolution, has been developed. Its working principle and on-line data processing method were elaborated. The new OFDI instrument was constructed all with currently available commercial communication products. It adopted the wide-spectrum amplified spontaneous emission light as the light source and optical-fiber tip as the test probe. Since this device consists of only fibers or fiber coupled components, it is very compact, convenient to operate, and easy to carry. By measuring the single-step length of a translation stage and the thickness of standard gauge blocks, its ability in implementing nanometer resolution and centimeter measuring range on-line measurements was validated.