No abstract

Color displays have become increasingly attractive, with dielectric optical nanoantennas demonstrating especially promising applications due to the high refractive index of the material, enabling devices to support geometry-dependent Mie resonance in the visible band. Although many structural color designs based on dielectric nanoantennas employ the method of artificial positive adjustment, the design cycle is too lengthy and the approach is non-intelligent. The commonly used phase change material Ge2Sb2Te5 (GST) is characterized by high absorption and a small contrast to the real part of the refractive index in the visible light band, thereby restricting its application in this range. The Sb2S3 phase change material is endowed with a wide band gap of 1.7 to 2 eV, demonstrating two orders of magnitude lower propagation loss compared to GST, when integrated onto a silicon waveguide, and exhibiting a maximum refractive index contrast close to 1 at 614 nm. Thus, Sb2S3 is a more suitable phase change material than GST for tuning visible light. In this paper, genetic algorithms and finite-difference time-domain (FDTD) solutions are combined and introduced as Sb2S3 phase change material to design nanoantennas. Structural color is generated in the reflection mode through the Mie resonance inside the structure, and the properties of Sb2S3 in different phase states are utilized to achieve tunability. Compared to traditional methods, genetic algorithms are superior-optimization algorithms that require low computational effort and a high population performance. Furthermore, Sb2S3 material can be laser-induced to switch the transitions of the crystallized and amorphous states, achieving reversible color. The large chromatic aberration ∆E modulation of 64.8, 28.1, and 44.1 was, respectively, achieved by the Sb2S3 phase transition in this paper. Moreover, based on the sensitivity of the structure to the incident angle, it can also be used in fields such as angle-sensitive detectors.

Fiber-optic magnetic field sensors have garnered considerable attention in the field of marine monitoring due to their compact size, robust anti-electromagnetic interference capabilities, corrosion resistance, high sensitivity, ease of multiplexing and integration, and potential for large-scale sensing networks. To enable the detection of marine magnetic field vector information, we propose an optical fiber vector magnetic field sensor that integrates three single-axis sensors in an orthogonal configuration. Theoretical analysis and experimental verification are conducted to investigate its magnetic field and temperature sensing characteristics, and a sensitivity matrix is established to address the cross-sensitivity between the magnetic field and temperature; experimental tests were conducted to assess the vector response of the three-dimensional (3D) vector sensor across the three orthogonal axes; the obtained experimental results illustrate the commendable magnetic field vector response exhibited by the sensor in the orthogonal axes, enabling precise demodulation of vector magnetic field information. This sensor presents several advantages, including cost-effectiveness, easy integration, and reliability vectorially. Consequently, it holds immense potential for critical applications in marine magnetic field network detection.