Multibeam satellite networks in Ka band have been designed to accommodate the increasing traffic demands of the coming years. However, these systems are spectrum limited due to the current spectrum allocation policies. This paper investigates the potentials of applying cognitive radio techniques in satellite communications in order to increase the spectrum opportunities for future generation of satellite networks without interfering operation of incumbent services. These extra spectrum opportunities can potentially amount to 2.4 GHz of bandwidth in downlink, and to 2 GHz of bandwidth in uplink for high density fixed satellite services (HDFSS).

Existing satellite communication standards such as DVB-S2, operate under highly-efficient adaptive coding and modulation schemes thus making significant progress in improving the spectral efficiencies of digital satellite broadcast systems. However, the constantly increasing demand for broadband and interactive satellite links emanates the need to apply novel interference mitigation techniques, striving towards Terabit throughput. In this direction, the objective of the present contribution is to investigate joint multiuser processing techniques for multibeam satellite systems. In the forward link, the performance of linear precoding is investigated with optimal nonlinear precoding (i.e., dirty article coding) acting as the upper performance limit. To this end, the resulting power and precoder design problems are approached through optimization methods. Similarly, in the return link the concept of linear filtering (i.e., linear minimum mean square error) is studied with the optimal successive interference cancelation acting as the performance limit. The derived capacity curves for both scenarios are compared to conventional satellite systems where beams are processed independently and interbeam interference is mitigated through a four color frequency reuse scheme, in order to quantify the potential gain of the proposed techniques.

We address fixed satellite broadcast reception with the goal of decreasing the aperture of the receiving antenna. The front-end antenna size is commonly determined by the presence of interference from adjacent satellites. A small antenna aperture leads to interference from neighboring satellites utilizing the same frequency bands. We propose a reception system with multiple input elements and with subsequent joint detection of desired and interfering signals that provides reliable communication in the presence of multiple interfering signals. An iterative least squares technique is adopted combining spatial and temporal processing and achieving robustness against pointing errors. Simulation results show how the proposed joint spatial and temporal adapted mechanism outperforms the simple combination of existing techniques under interference overloaded conditions. Also, we demonstrate how to accurately synchronize the signals as part of the detection procedure. The technique is evaluated in a realistic simulation study representing the conditions encountered in a DVB-S2 broadcast scenario.Index Terms-Satellite broadcast reception, adjacent satellite interference, interference cancellation, joint spatial and temporal processing, interference overloaded system.

Grotz, J. et al. (2012) Multicarrier digital pre-distortion/ equalization techniques for non-linear satellite channels. In: 30th AIAA International Communications Satellite Systems Conference (ICSSC)http://dx.doi.org/10. 2514/6.2012-15156 N.B. When citing this work, cite the original published paper.

This paper designs dynamic on-board signal processing schemes in a multiple gateway multibeam satellite system where full frequency reuse pattern is considered among the beams and feeds. In particular, we deploy on-board Joint Precoding, Feed selection and Signal switching mechanism (JPFS) so that the following advantages are realized, I) No need of Channel State Information (CSI) exchange among the gateways and satellite, since the performance of precoding is highly sensitive to the quality of CSI, II) In case one gateway fails, rerouting signals through other gateways can be applied without any extra signal processing, III) Properly selecting on-board feed/s to serve each user which generates maximum gain toward corresponding user, IV) Flexibly switching the signals received from the gateways to requested users where each user can dynamically request traffic from any gateway, and V) Multiple user with multiple traffic streams can be dynamically served at each beam. However, deploying such JPFS architecture imposes high complexity to the satellite payload. To tackle this issue, this study aims at deploying JPFS that can provide affordable complexity at the payload. In addition, while increasing the data demand imposes extensive bandwidth resources requirement in the feeder link, the proposed JPFS design works efficiently with available feeder link resources even if the data demand increases. The proposed design is evaluated with a close-to-real beam pattern and the latest broadband communication standard for satellite communications.