No abstract

A detailed experimental and analytical study has been performed to evaluate how copper porous foam (CPF) enhances the heat transfer performance in a cylindrical solid/liquid phase change thermal energy storage system. The CPF used in this study had a 95% porosity and the phase change material (PCM) was 99% pure eicosane. The PCM and CPF were contained in a vertical cylinder where the temperature at its radial boundary was held constant, allowing both inward freezing and melting of the PCM. Detailed quantitative time-dependent volumetric temperature distributions and melt/freeze front motion and shape data were obtained. As the material changed phase, a thermal resistance layer built up, resulting in a reduced heat transfer rate between the surface of the container and the phase change front. In the freezing analysis, we analytically determined the effective thermal conductivity of the combined PCM/CPF system and the results compared well to the experimental values. The CPF increased the effective thermal conductivity from 0.423W∕mKto3.06W∕mK. For the melting studies, we employed a heat transfer scaling analysis to model the system and develop heat transfer correlations. The scaling analysis predictions closely matched the experimental data of the solid/liquid interface position and Nusselt number.

No abstract

No abstract

No abstract