The application of municipal sewage sludge as fertilizer in the production of non-food energy crops is an environmentally and economically sustainable approach to sewage sludge management. In addition, the application of municipal sewage sludge to energy crops such as Miscanthus x giganteus is an alternative form of recycling nutrients and organic material from waste. Municipal sewage sludge is a potential source of heavy metals in the soil, some of which can be removed by growing energy crops that are also remediation agents. Therefore, the objective of the research was to investigate the effect of municipal sewage sludge applied at three different rates of 1.66, 3.22 and 6.44 t/ha on the production of Miscanthus. Based on the analyses conducted on the biomass of Miscanthus fertilized with sludge from the wastewater treatment plant in three fertilization treatments, it can be concluded that the biomass of Miscanthus is a good feedstock for the process of direct combustion. Moreover, the application of the largest amount of municipal sewage sludge during cultivation had no negative effect on the properties of Miscanthus biomass. Moreover, the cellulose and hemicellulose content of Miscanthus is ideal for the production of second-generation liquid biofuels. Fertilizer treatments had no effect on the content of cellulose and lignin, while a significant statistical difference was found for hemicellulose.

Miscanthus is a perennial energy crop that produces high yields and has the potential to be converted into energy. The ultimate analysis determines the composition of the biomass and the energy value in terms of the higher heating value (HHV), which is the most important parameter in determining the quality of the fuel. In this study, an artificial neural network (ANN) model based on the principle of supervised learning was developed to predict the HHV of miscanthus biomass. The developed ANN model was compared with the models of predictive regression models (suggested from the literature) and the accuracy of the developed model was determined by the coefficient of determination. The paper presents data from 192 miscanthus biomass samples based on ultimate analysis and HHV. The developed model showed good properties and the possibility of prediction with high accuracy (R2 = 0.77). The paper proves the possibility of using ANN models in practical application in determining fuel properties of biomass energy crops and greater accuracy in predicting HHV than the regression models offered in the literature.

Invasive plant species (IAS), with their numerous negative ecological, health, and economic impacts, represent one of the greatest conservation challenges in the world. Reducing the negative impacts and potentially exploiting the biomass of these plant species can significantly contribute to sustainable management, protect biodiversity, and create a healthy environment. Therefore, the main objective of this study was to evaluate the nutritional potential, phytochemical status, and antioxidant capacity of nine alien invasive plant species: Abutilon theophrasti, Amaranthus retroflexus, Ambrosia artemisiifolia, Datura stramonium, Erigeron annuus, Galinsoga ciliata, Reynoutria japonica, Solidago gigantea, and Sorghum halepense. Multivariate statistical methods such as cluster and PCA were performed to determine possible connections and correlations among selected IAS depending on the phytochemical content. According to the obtained results, R. japonica was notable with the highest content of vitamin C (38.46 mg/100 g FW); while E. annuus (1365.92 mg GAE/100 g FW) showed the highest values of total polyphenolic compounds. A. retroflexus was characterized by the highest content of total chlorophylls (0.26 mg/g) and antioxidant capacity (2221.97 µmol TE/kg). Therefore, it can be concluded that the selected IAS represent nutrient-rich plant material with significant potential for the recovering of bioactive compounds.

The aim of this study was to investigate the potential of using structural analysis parameters for estimating the higher heating value (HHV) of biomass by obtaining information on the composition of cellulose, lignin, and hemicellulose. To achieve this goal, several nonlinear mathematical models were developed, including polynomials, support vector machines (SVMs), random forest regression (RFR) and artificial neural networks (ANN) for predicting HHV. The performed statistical analysis “goodness of fit” showed that the ANN model has the best performance in terms of coefficient of determination (R2 = 0.90) and the lowest level of model error for the parameters X2 (0.25), RMSE (0.50), and MPE (2.22). Thus, the ANN model was identified as the most appropriate model for determining the HHV of different biomasses based on the specified input parameters. In conclusion, the results of this study demonstrate the potential of using structural analysis parameters as input for HHV modeling, which is a promising approach for the field of biomass energy production. The development of the model ANN and the comparative analysis of the different models provide important insights for future research in this field.

In this study, an evaluation of food waste generation was conducted, using images taken before and after the daily meals of people aged between 20 and 30 years in Serbia, for the period between January 1st and April 31st in 2022. A convolutional neural network (CNN) was employed for the tasks of recognizing food images before the meal and estimating the percentage of food waste according to the photographs taken. Keeping in mind the vast variates and types of food available, the image recognition and validation of food items present a generally very challenging task. Nevertheless, deep learning has recently been shown to be a very potent image recognition procedure, while CNN presents a state-of-the-art method of deep learning. The CNN technique was implemented to the food detection and food waste estimation tasks throughout the parameter optimization procedure. The images of the most frequently encountered food items were collected from the internet to create an image dataset, covering 157 food categories, which was used to evaluate recognition performance. Each category included between 50 and 200 images, while the total number of images in the database reached 23,552. The CNN model presented good prediction capabilities, showing an accuracy of 0.988 and a loss of 0.102, after the network training cycle. The average food waste per meal, in the frame of the analysis in Serbia, was 21.3%, according to the images collected for food waste evaluation.