We report the fabrication and characterization of high index contrast (Δn≈0.9) GeTe4 channel waveguides on ZnSe substrate for evanescent-field-based biosensing applications in the mid-IR spectral region. GeTe4 films were deposited by RF sputtering and characterized for their structure, composition, transparency, and dispersion. The lift-off technique was used to pattern the waveguide channels. Waveguiding from 2.5-3.7 and 6.4-7.5 μm was demonstrated, and mode intensity profile and estimated propagation losses are given for the 3.5 μm wavelength.

The future of single cell diversity screens involves ever-larger sample sizes, dictating the need for higher throughput methods with low analytical noise to accurately describe the nature of the cellular...

Particles in a rotating fluid experience gravity-directed orbits to remain in suspension.

We report a rapid laser-based method for structuring polydimethylsiloxane (PDMS) on the micron-scale. This mask-less method uses a digital multi-mirror device as a spatial light modulator to produce a given spatial intensity pattern to create arbitrarily shaped structures via either ablation or multi-photon photo-polymerisation in a master substrate, which is subsequently used to cast the complementary patterns in PDMS. This patterned PDMS mould was then used for micro-contact printing of ink and biological molecules.

A key challenge in the development of a microflow cytometry platform is the integration of the optical components with the fluidics as this requires compatible micro-optical and microfluidic technologies. In this work a microflow cytometry platform is presented comprising monolithically integrated waveguides and deep microfluidics in a rugged silica chip. Integrated waveguides are used to deliver excitation light to an etched microfluidic channel and also collect transmitted light. The fluidics are designed to employ inertial focussing, a particle positioning technique, to reduce signal variation by bringing the flowing particles onto the same plane as the excitation light beam. A fabrication process is described which exploits microelectronics mass production techniques including: sputtering, ICP etching and PECVD. Example devices were fabricated and the effectiveness of inertial focussing of 5.6 µm fluorescent beads was studied showing lateral and vertical confinement of flowing beads within the microfluidic channel. The fluorescence signals from flowing calibration beads were quantified demonstrating a CV of 26%. Finally the potential of this type of device for measuring the variation in optical transmission from input to output waveguide as beads flowed through the beam was evaluated.