In this work, we evaluate the resistive switching (RS) and synaptic characteristics of a fully transparent resistive random-access memory (T-RRAM) device based on indium-tin-oxide (ITO) electrodes. Here, we fabricated ITO/WOX/ITO capacitor structure and incorporated DC-sputtered WOX as the switching layer between the two ITO electrodes. The device shows approximately 77% (including the glass substrate) of optical transmittance in visible light and exhibits reliable bipolar switching behavior. The current-voltage (I–V) curve is divided into two types: partial and full curves affected by the magnitude of the positive voltage during the reset process. In the partial curve, we confirmed that the retention could be maintained for more than 104 s and the endurance for more than 300 cycles could be stably secured. The switching mechanism based on the formation/rupture of the filament is further explained through the extra oxygen vacancies provided by the ITO electrodes. Finally, we examined the responsive potentiation and depression to check the synaptic characteristics of the device. We believe that the transparent WOX-based RRAM could be a milestone for neuromorphic devices as well as future non-volatile transparent memory.

Nitride film played an essential role as an excellent diffusion barrier in the semiconductor field for several decades. In addition, interest in next-generation memories induced researchers’ attention to nitride film as a new storage medium. A Pt/AlN/TaN device was investigated for resistive random-access memory (RRAM) application in this work. Resistive switching properties were examined in the AlN thin film formed by atomic layer deposition (ALD). The unique switching feature conducted under the positive voltage was investigated, while the typical bipolar switching was conducted under the application of negative voltage. Good retention and DC, and pulse endurances were achieved in both conditions and compared to the memory performances. Finally, the electronic behaviors based on the unique switching feature were analyzed through X-ray photoelectron spectroscopy (XPS) and the current–voltage (I–V) linear fitting model.

As artificial intelligence technology advances, it is necessary to imitate various biological functions to complete more complex tasks. Among them, studies have been reported on the nociceptor, a critical receptor of sensory neurons that can detect harmful stimuli. Although a complex CMOS circuit is required to electrically realize a nociceptor, a memristor with threshold switching characteristics can implement the nociceptor as a single device. Here, we suggest a memristor with a Pt/HfO2/TaOx/TaN bilayer structure. This device can mimic the characteristics of a nociceptor including the threshold, relaxation, allodynia, and hyperalgesia. Additionally, we contrast different electrical properties according to the thickness of the HfO2 layer. Moreover, Pt/HfO2/TaOx/TaN with a 3 nm thick HfO2 layer has a stable endurance of 1000 cycles and controllable threshold switching characteristics. Finally, this study emphasizes the importance of the material selection and fabrication method in the memristor by comparing Pt/HfO2/TaOx/TaN with Pt/TaOx/TaN, which has insufficient performance to be used as a nociceptor.

In this work, the resistive switching behavior of bilayer ZnO/Al2O3-based resistive-switching random access memory (RRAM) devices is demonstrated. The polycrystalline nature of the ZnO layer confirms the grain boundary, which helps easy oxygen ion diffusion. Multilevel resistance states were modulated under DC bias by varying the current compliance from 0.1 mA to 0.8 mA, the SET operations where the low resistance state of the memristor device was reduced from 25 kΩ to 2.4 kΩ. The presence of Al2O3 acts as a redox layer and facilitates oxygen vacancy exchange that demonstrates stable gradual conductance change. Stepwise disruption of conductive filaments was monitored depending on the slow DC voltage sweep rate. This is attributed to the atomic scale modulation of oxygen vacancies with four distinct reproducible quantized conductance states, which shows multilevel data storage capability. Moreover, several crucial synaptic properties such as potentiation/depression under identical presynaptic pulses and the spike-rate-dependent plasticity were implemented on ITO/ZnO/Al2O3/TaN memristor. The postsynaptic current change was monitored defining the long-term potentiation by increasing the presynaptic stimulus frequency from 5 Hz to 100 Hz. Moreover, the repetitive pulse voltage stimulation transformed the short-term plasticity to long-term plasticity during spike-number-dependent plasticity.

The attempts to devise networks that resemble human minds are steadily progressing through the development and diversification of neural networks (NN), such as artificial NN (ANN), convolution NN (CNN), and recurrent NN (RNN). Meanwhile, memory devices applied on the networks are also being studied together, and RRAM is the one of the most promising candidates. The fabricated ITO/SnOX/TaN device showed two forms of current–voltage (I-V) curves, classified as dynamic and static. It was triggered from the forming process, and the difference between the two curves resulted from the data retention measured at room temperature for 103 s. The dynamic curve shows a time-dependent change in the data, and the cause of the data preservation period was considered through X-ray photoelectron spectroscopy (XPS) and linear fitting in conduction mechanisms. To confirm whether the memory performance of the device may be implemented on the synapse, the change in the plasticity was confirmed using a rectangular-shaped pulse. Paired-pulse facilitation (PPF) was implemented, and the change from short-term potentiation (STP) to long-term potentiation (LTP) was achieved.