We have prepared and characterized hydrosulfide-selective ChemFET devices based on a nitrile butadiene rubber membrane containing tetraoctylammonium nitrate as a chemical recognition element that is applied to commercially available field-effect transistors. The sensors have fast (120 s) reversible responses, selectivity over other biologically relevant thiol-containing species, detection limits of 8 mM, and a detection range from approximately 5 to 500 mM. Sensitivities are shown to be 53 mV per decade at pH 8. Use of this compact, benchtop sensor platform requires little training – only the ability to measure DC voltage, which can be accomplished with a conventional multimeter or a simple analog data acquisition device paired with a personal computer. To the best of our knowledge, this report describes the first example of direct potentiometric measurement of the hydrosulfide ion in water.

Hydrophobic coatings on cotton fabrics were successfully prepared via solution deposition of a “flat” nanoscale aluminum hydroxo cluster and a photo-assisted anneal using ultraviolet light. The coatings have a low...

The use of a novel inorganic nanoscale cluster (Al[(u-OH)2Co(NH3)4]3(NO3)6) was investigated for its utility as a precursor for AlCoOx films. Mixed-metal aluminum and cobalt oxide thin films were solution deposited...