Crystalline monomolecular cell surface layers, S-layers, are one of the most common outermost cell envelope components of the prokaryotic organisms (bacteria and archaeda) that protects them from competitive habitats. Since isolated S-protein subunits are able to re-assemble into crystalline arrays on lipid films and solid supports making biomimetic surfaces, S-layer technology is currently used in nanobiotechnology. An important aspect of the biomimetic surfaces built with S-layers is their stability under extreme solvent conditions or temperature. Chemical (pH, alcohol) and physical (thermal) denaturant conditions were employed to test the stability of S-layers. Recrystallized bacterial surface layers from Bacillus sphaericus (SbpA) on hydrophilic silicon wafers loses the crystalline structure at 80% ethanol/water mixtures, the change in structure being reversible after treating the surface with buffer solution. SbpA on silicon supports denatures at pH 3 and at 70 degrees C, and the process is irreversible. Cross-linking of SbpA enhances the stability for high ethanol and acidic conditions, but it does not improve thermal stability. Recrystallized SbpA on secondary cell wall polymer (SCWP), a natural environment for the protein layer, is more resistant to ethanol and pH exposure than recrystallized SbpA on hydrophilic silicon supports. Atomic force microscopy (AFM) was used to monitor the loss of stability and the changes in protein layer conformation.

The interest in studying the mechanical and adhesive properties of cells has increased in recent years. The cytoskeleton is known to play a key role in cell mechanics. However, the role of the microtubules in shaping cell mechanics is not yet well understood. We have employed Atomic Force Microscopy (AFM) together with confocal fluorescence microscopy to determine the role of microtubules in cytomechanics of Human Umbilical Vein Endothelial Cells (HUVECs). Additionally, the time variation of the adhesion between tip and cell surface was studied. The disruption of microtubules by exposing the cells to two colchicine concentrations was monitored as a function of time. Already, after 30 min of incubation the cells stiffened, their relaxation times increased (lower fluidity) and the adhesion between tip and cell decreased. This was accompanied by cytoskeletal rearrangements, a reduction in cell area and changes in cell shape. Over the whole experimental time, different behavior for the two used concentrations was found while for the control the values remained stable. This study underlines the role of microtubules in shaping endothelial cell mechanics.

The self-assembly kinetics and nanocrystal formation of the bacterial surface-layer-protein SbpA are studied with a combination of quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). Silane coupling agents, aminopropyltriethoxysilane (APTS) and octadecyltrichlorosilane (OTS), are used to vary the protein-surface interaction in order to induce new recrystallization pathways. The results show that the final S-layer crystal lattice parameters (a = b = 14 nm, gamma = 90 degrees ), the layer thickness (15 nm), and the adsorbed mass density (1700 ng cm(-2)) are independent of the surface chemistry. Nevertheless, the adsorption rate is five times faster on APTS and OTS than on SiO(2,) strongly affecting protein nucleation and growth. As a consequence, protein crystalline domains of 0.02 microm(2) for APTS and 0.05 microm(2) for OTS are formed, while for silicon dioxide the protein domains have a typical size of about 32 microm(2). In addition, more-rigid crystalline protein layers are formed on hydrophobic substrates. In situ AFM experiments reveal three different kinetic steps: adsorption, self-assembly, and crystalline-domain reorganization. These steps are corroborated by frequency-dissipation curves. Finally, it is shown that protein adsorption is a diffusion-driven process. Experiments at different protein concentrations demonstrate that protein adsorption saturates at 0.05 mg mL(-1) on silane-coated substrates and at 0.07 mg mL(-1) on hydrophilic silicon dioxide.

A human hepatoma cell line (HepG2) was cultured on positively and negatively charged polyelectrolytes. Cell/surface adhesion and cell shape evolution were followed with quartz microbalance with dissipation (QCM-D) and optical microscopy as a function of time, respectively. In particular, substrates coated with poly(ethyleneimine) (PEI) led to fast cell attachment and further spreading, with average maximum frequency Deltaf = 79 Hz and dissipation DeltaD = 40 x 10(-6). On the contrary, no cell spreading was observed on poly(sodium-4-styrenesulfonate) (PSS), with Deltaf = 33 Hz and DeltaD = 4.5 x 10(-6). Atomic force microscopy (AFM) was used to investigate the influence of cell shape on its mechanical properties. Considering the cells as an homogenous solid material, the corresponding elastic modulus was estimated using the Hertz model. The elastic modulus was calculated at the central part of the cell, and the average values obtained were 191 +/- 14 Pa and 941 +/- 58 Pa for cells adsorbed on PSS and PEI, respectively. Thus, different cell-substrate interaction implied different cell mechanical properties reflected in a higher elastic modulus for stronger cell/substrate interaction. The combination of QCM-D, AFM, and optical microscopy allowed the online study of the cell adhesion process, and the mechanical properties of the adhered cells.

A‐to‐I RNA editing by ADARs is an abundant epitranscriptomic RNA‐modification in metazoa. In mammals, Flna pre‐mRNA harbours a single conserved A‐to‐I RNA editing site that introduces a Q‐to‐R amino acid change in Ig repeat 22 of the encoded protein. Previously, we showed that FLNA editing regulates smooth muscle contraction in the cardiovascular system and affects cardiac health. The present study investigates how ADAR2‐mediated A‐to‐I RNA editing of Flna affects actin crosslinking, cell mechanics, cellular adhesion and cell migration. Cellular assays and AFM measurements demonstrate that the edited version of FLNA increases cellular stiffness and adhesion but impairs cell migration in both, mouse fibroblasts and human tumour cells. In vitro, edited FLNA leads to increased actin crosslinking, forming actin gels of higher stress resistance. Our study shows that Flna RNA editing is a novel regulator of cytoskeletal organisation, affecting the mechanical property and mechanotransduction of cells.