No abstract

In order for microalgae-based processes to reach commercial production for biofuels and high-value products such as omega-3 fatty acids, it is necessary that economic feasibility be demonstrated at the industrial scale. Therefore, process optimization is critical to ensure that the maximum yield can be achieved from the most efficient use of resources. This is particularly true for processes involving heterotrophic microalgae, which have not been studied as extensively as phototrophic microalgae. An area that has received significant conceptual praise, but little experimental validation, is that of nutrient recycling, where the waste materials from prior cultures and post-lipid extraction are reused for secondary fermentations. While the concept is very simple and could result in significant economic and environmental benefits, there are some underlying challenges that must be overcome before adoption of nutrient recycling is viable at commercial scale. Even more, adapting nutrient recycling for optimized heterotrophic cultures presents some added challenges that must be identified and addressed that have been largely unexplored to date. These challenges center on carbon and nitrogen recycling and the implications of using waste materials in conjunction with virgin nutrients for secondary cultures. The aim of this review is to provide a foundation for further understanding of nutrient recycling for microalgae cultivation. As such, we outline the current state of technology and practical challenges associated with nutrient recycling for heterotrophic microalgae on an industrial scale and give recommendations for future work.

Efficient resource usage is important for cost-effective microalgae production, where the incorporation of waste streams and recycled water into the process has great potential. This study builds upon emerging research on nutrient recycling in thraustochytrid production, where waste streams are recovered after lipid extraction and recycled into future cultures. This research investigates the nitrogen flux of recycled hydrolysate derived from enzymatic lipid extraction of thraustochytrid biomass. Results indicated the proteinaceous content of the recycled hydrolysate can offset the need to supply fresh nitrogen in a secondary culture, without detrimental impact upon the produced biomass. The treatment employing the recycled hydrolysate with no nitrogen addition accumulated 14.86 g L(-1) of biomass in 141 h with 43.3 % (w/w) lipid content compared to the control which had 9.26 g L(-1) and 46.9 % (w/w), respectively. This improved nutrient efficiency and wastewater recovery represents considerable potential for enhanced resource efficiency of commercial thraustochytrid production.

No abstract

The push for alternatives to petroleum fuels has forced researchers to look for highly productive, renewable, non-food resources. The advantages of using microalgae instead of traditional oil crops for biofuel production include high oil yields, rapid reproductive rates, and versatile growing requirements. In order to reduce the cost of producing microalgae based biofuels, wastewater has been used as a nutrient source instead of specialized plant nutrients. The purpose of this study was to compare the relative effectiveness of different combinations of microalgae strain and dairy wastewater for increasing biomass. The methods for monitoring growth included optical density, cell counting, biomass estimation by chlorophyll-a, and volatile suspended solids. The analyses compared four concentrations of wastewater media as well as four strain treatments: Chlorella vulgaris, Tetraselmis sp., mixed freshwater culture and mixed saltwater culture. Optimum wastewater concentrations for microalgae growth were approximately 0% and 25% for most strain treatments. The results of the wastewater treatments concluded that dairy wastewater could serve as an effective nutrient substitute for plant food at concentrations approximately 25%. Chlorella vulgaris and Tetraselmis sp. prevailed over the mixed cultures for biomass production. Nitrate was the most limiting nutrient and exhibited the greatest reductions, sometimes in excess of 90%. The regression equations derived from the volatile suspended solids data v achieved high R 2 values and determined that total nitrogen, ammonium, and nitrate were significant in the model. In those equations, increasing either ammonium or nitrate yielded an increase in volatile suspended solids. With regards to comparing biomass quantification methods, the two most useful and reliable biomass quantification methods were optical density and volatile suspended solids.