All-solution-processed pure formamidinium-based perovskite light-emitting diodes (PeLEDs) with record performance are successfully realized. It is found that the FAPbBr device is hole dominant. To achieve charge carrier balance, on the anode side, PEDOT:PSS 8000 is employed as the hole injection layer, replacing PEDOT:PSS 4083 to suppress the hole current. On the cathode side, the solution-processed ZnO nanoparticle (NP) is used as the electron injection layer in regular PeLEDs to improve the electron current. With the smallest ZnO NPs (2.9 nm) as electron injection layer (EIL), the solution-processed PeLED exhibits a highest forward viewing power efficiency of 22.3 lm W , a peak current efficiency of 21.3 cd A , and an external quantum efficiency of 4.66%. The maximum brightness reaches a record 1.09 × 10 cd m . A record lifetime T of 436 s is achieved at the initial brightness of 10 000 cd m . Not only do PEDOT:PSS 8000 HIL and ZnO NPs EIL modulate the injected charge carriers to reach charge balance, but also they prevent the exciton quenching at the interface between the charge injection layer and the light emission layer. The subbandgap turn-on voltage is attributed to Auger-assisted energy up-conversion process.

In all-solution processed inverted quantum dots based light emitting diodes (QLEDs), the solvent erosion on the quantum dot (QD) layer prevents devices from reaching high performance. By employing an orthogonal solvent 1,4-dioxane for the hole transport layer (HTL) poly(9-vinlycarbazole) (PVK), the external quantum efficiencies (EQE) of red QLED is increased 4-fold, while the luminous efficiencies (LE) of blue QLED is enhanced by 25 times, compared to the previous devices' record. To further improve the device efficiency and reduce the efficiency roll-off, solution processed PVK/poly [(9,9-dioctylfluorenyl-2,7-diyl)-co-(4,4'-(N-(p-butylphenyl))diphenylamine)] (TFB) double-layer HTL is introduced to facilitate hole injection with stepwise energy level. By reducing the hole injection barrier, the turn-on voltage of QLEDs decreases from 3.4 to 2.7 V for red, from 5.1 to 2.7 V for green, and from 5.3 to 4.1 V for blue. The peak LE reach 22.1 cd/A, 21.4 cd/A, and 1.99 cd/A, while the maximum EQE reach 12.7%, 5.29%, and 5.99%, for red, green, and blue QLEDs, respectively. To the best of our knowledge, the red and blue QLEDs exhibit the best device performance among all the all-solution processed inverted QLEDs. In addition, the blue QLED is the champion among all the inverted QLEDs, including the devices fabricated by thermal evaporation.

No abstract

This article is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND) (http://www.karger.com/Services/OpenAccessLicense). Usage and distribution for commercial purposes as well as any distribution of modified material requires written permission.