Microphones for hearing aid systems are required to have high sensitivity, an appropriate bandwidth, and a wide dynamic range. In this paper, a high sensitivity microphone, 4 mm in diameter and using a multilayer graphene-PMMA laminated diaphragm that can be applied in hearing aids, is designed, optimized, and implemented. Typically, polyphenylene sulfide (PPS) has been used for the diaphragm of electret condenser microphones (ECM), and this method provides simple, low cost mass production. Generally, the sensitivity of the commercial 4 mm diameter ECM is about -30 to 35 dB (0 dB = 1 V/Pa). A microphone using a nanometer-thick graphene diaphragm has been found to have higher sensitivity than the conventional ECM. However, nanometer-thick multilayer graphene is vulnerable to large mechanical shocks or high sound pressures, and the practical production of nanometer-thick diaphragms also poses a challenge. However, if a multilayer graphene diaphragm of the same thickness as the conventional ECM is used, displacement during diaphragm vibration will be severely attenuated due to the high elastic modulus of graphene, and the microphone sensitivity will be greatly reduced. In this paper, we fabricate a multilayer graphene/poly(methyl methacrylate) (PMMA) laminated diaphragm with sensitivity higher than that of any other microphones currently available for hearing aids, with the appropriate bandwidth in the auditory range. The high sensitivity arises from the laminated structure of the thin graphene membrane with high elastic modulus and from the PMMA membrane with lower elastic modulus and higher dielectric constant. The optimal thickness ratio of the graphene-PMMA layered diaphragm was studied by both analytical and experimental methods, and then a fabricated diaphragm was assembled in a 4 mm diameter microphone package. The performance of the implemented microphone was evaluated, including the sensitivity and total harmonic distortion. It is demonstrated that the microphone using a multilayer graphene-PMMA diaphragm has an excellent sensitivity of -20 dB and a dynamic range of 90 dB, which is on average 9 dB higher than the microphone using the conventional ECM diaphragm.

Fully Implantable hearing devices consist of a microphone that is implanted under the human skin. However after the implantation, the gain characteristics of the microphone are attenuated at the high frequencies because of the sound filtering effect of the skin and tissue. To solve this problems, we proposed an implantable microphone with an acoustic tube, which generates a resonance effect between the diaphragm and the acoustic transducer inside a case. By performing several experiments in water, it has been confirmed that the frequency response of the implantable microphone at high frequencies can be improved by use of the acoustic tube.

Background Recently, a capsule endoscope has been developed and many researchers have been trying to develop locomotive capsules. To develop locomotive capsules, the inner volume of the capsule has to be large enough to insert actuators, and the edge shape of the exterior capsule has to be suitable for locomotion. There are many locomotional methods, but an electrical stimulus method provides the appropriate power consumption, plus the shape of the capsule is the same as general telemetry capsules. In this paper, the optimal shape of the electrical stimulus capsule (ESC) was designed and implemented to provide the appropriate inner volume and moving speed of the capsule.

In this paper, a user-friendly and low-cost wireless health monitoring system that measures skin temperature from the back of the body for monitoring the core body temperature is proposed. To measure skin temperature accurately, a semiconductor-based microtemperature sensor with a maximum accuracy of ±0.3°C was chosen and controlled by a high-performance/low-power consumption Acorn-Reduced Instruction Set Computing Machine (ARM) architecture microcontroller to build the temperature measuring device. Relying on a 2.4 GHz multichannel Gaussian frequency shift keying (GFSK) RF communication technology, up to 100 proposed temperature measuring devices can transmit the data to one receiver at the same time. The shell of the proposed wireless temperature-measuring device was manufactured via a 3D printer, and the device was assembled to conduct the performance tests and in vivo experiments. The performance test was conducted with a K-type temperature sensor in a temperature chamber to observe temperature measurement performance. The results showed an error value between two devices was less than 0.1°C from 25 to 40°C. For the in vivo experiments, the device was attached on the back of 10 younger male subjects to measure skin temperature to investigate the relationship with ear temperature. According to the experimental results, an algorithm based on the curve-fitting method was implemented in the proposed device to estimate the core body temperature by the measured skin temperature value. The algorithm was established as a linear model and set as a quadratic formula with an interpolant and with each coefficient for the equation set with 95% confidence bounds. For evaluating the goodness of fit, the sum of squares due to error (SSE), R-square, adjusted R-square, and root mean square error (RMSE) values were 33.0874, 0.0212, 0.0117, and 0.3998, respectively. As the experimental results have shown, the mean value for an error between ear temperature and estimated core body temperature is about ±0.19°C, and the mean bias is 0.05 ± 0.14°C when the subjects are in steady status.

No abstract