Purpose. Representation in a generalized form of the conducted research on the development of technology for heap leaching of gold-bearing tailings at the Vasilkovsky GOK (Altyntau Kokshetau), which can be used to recover gold from technogenic deposits in Kazakhstan. Methods. The research on the gold recovery from the ore beneficiation tailings at the Vasilkovsky deposit is conducted using direct cyanidation. Experiments are performed in open heat-resistant beakers equipped with a mechanical agitator. The preparation of the material for cyanidation consists of the following operations, such as grinding, water washing and alkaline treatment followed by cyanidation. The optimal cyanidation parameters are determined by performing a series of experiments with a change in one parameter at a constant value of others. After the optimal process duration is determined, a series of experiments are conducted with a change in the solids content in the pulp of 20, 25, 33, 50 and 100%. The concentration of cyanide in the solution is 0.1-1.0 g/dm3. The concentration of sodium thiosulphate in the cyanide solution is 0.5-5.0 g/dm3. The process temperature varies within 20, 30, and 40°С. The content of the nutrient medium is the sodium thiosulphate for the used culture T10. Findings. It has been determined that with an increase in the solids content in the pulp, the degree of gold recovery from tai-lings increases, reaching a maximum of 97.5%, with a ratio of (solid : liquid) S:L = 1:1. When the solids content in the pulp is below 50%, a longer agitation leaching of the pulp is required to achieve a recovery of at least 85-90%, which, in turn, leads to high operating costs. Originality. For the first time it has been found that the optimal solids content for maximum gold recovery in the pulp can be considered 50% (or S:L = 1:1). Practical implications. Increasing the solids content in the pulp contributes to the duration of the solvent contact with the ore mass, which allows the use of less concentrated solutions of the leaching agent.

Purpose. Formation of a realistic assessment of the prospects for the introduction of automated ore extraction systems and quality control in the activities of modern mining enterprises. Methodology. The basis of the methodological approach in this study is a combination of system analysis of various aspects of automation of management processes of ore quarrying, with an analytical investigation of the prospects for optimising ore mining processes in quarries using modern methods of automation and digitalisation. Findings. A systematic analysis of various aspects of automation of ore mining management processes by quarry method was performed. The most promising areas of quarry development in order to obtain ore raw materials of the highest quality were identified. A scheme showing the systems of methods for managing the quality of ore mined by the mining method at the mining enterprises was presented. In addition, the scheme of automation of ore quality management processes extracted in quarries was presented and analysed. Originality. A real assessment of the prospects for the introduction of automated systems of ore mining and quality control in the activities of modern mining enterprises has been formed. Practical value. The results of the research can be used as a basis for training specialists in the field of mining industry, whose professional responsibilities include solving issues of ore mining in a quarry way.

Purpose. To study gold-bearing ores subjected to heap leaching technology to identify both free gold particles, as well as gold in aggregates and adhesions, which makes it possible to obtain data on the distribution of gold by its occurrence forms. Methodolgy. Leaching process studies are conducted at the laboratory setup of the Institute of Metallurgy and Ore Beneficiation of the Ministry of Education and Science of the Republic of Kazakhstan. The gold particles are studied using an AxioScope A1 optical microscope on the polished thin section surface. The sample materials are taken from the heap leaching site of the Vasilkovsky gold ore deposit. Findings. As a result of a microscopic test of a sample taken from the heap leaching site, ultrafine-dispersed and finely-dispersed gold particles have been found both in free form and in aggregates with waste rock and arsenical pyrite, as well as the fact of Au particles adhesions, accumulated on a grain of the host waste rock. The size class of detected Au particles varies from 0.35 to 9.5 m. Originality. For the first time, according to the samples of gold-bearing ores of the Vasilkovsky gold ore deposit, a pattern of the gold distribution according to the forms of its occurrence has been revealed. Practical value. The data obtained as a result of the research make it possible to predict the distribution of the gold form occurrence in other areas of the deposit. This can greatly simplify the conditions for its development, as well as adjust the technological process of leaching the gold-bearing ores and the main technological parameters of the heap leaching process.