We present a simple microfluidic system for rapid screening of Escherichia coli (E. coli) O157:H7 employing the specificity of immunomagnetic separation (IMS) via immiscible filtration assisted by surface tension (IFAST), and the sensitivity of the subsequent adenosine triphosphate (ATP) assay by the bioluminescence luciferin/luciferase reaction. The developed device was capable of detecting E. coli O157:H7 from just 6 colony forming units (CFU) in 1 mL spiked buffer within 20 min. When tested with wastewater discharged effluent samples, without pre-concentration, the device demonstrated the ability to detect 10 CFU per mL seeded; suggesting great potential for point-of-need microbiological water quality monitoring.

The presented work demonstrates novel functionalities of hybrid paper-polymer centrifugal devices for assay performance enhancement that leverage the advantages of both paper-based and centrifugal microfluidic platforms. The fluid flow is manipulated by balancing the capillary force of paper inserts with the centrifugal force generated by disc rotation to enhance the signal of a colorimetric lateral flow immunoassay for pathogenic . Low-cost centrifugation for pre-concentration of bacteria was demonstrated by sample sedimentation at high rotational speeds before supernatant removal by a paper insert via capillary force after deceleration. The live bacteria capture efficiency of the device was similar to a commercial centrifuge. This pre-concentrated sample when combined with gold nanoparticle immunoconjugate probes resulted in a detection limit that is 10× lower than a non-concentrated sample for a lateral flow immunoassay. Signal enhancement was also demonstrated through rotational speed variation to prevent the flow for on-device incubation and to reduce the flow rate, thus increasing the sample residence time for the improved capture of gold nanoparticle-bacteria complexes in an integrated paper microfluidic assay. Finally, multiple sequential steps including sample pre-concentration, filtration, incubation, target capture by an integrated paper microfluidic assay, silver enhancement and quenching, and index matching were completed within a single device. The detection limit was 10 colony forming units per ml, a 100× improvement over a similar paper-based lateral flow assay. The techniques utilize the advantages of paper-based microfluidic devices, while facilitating additional functionalities with a centrifugal microfluidic platform for detection performance enhancement in a low-cost, automated platform amenable to point-of-care environments.

Current centralised healthcare models pose many challenges, particularly for developing countries such as South Africa, where travel and time costs make it difficult for patients to seek healthcare, even when urgently needed. To address this issue, point-of-care (PoC) tests, which are performed at or near the site of clinical care, have gained popularity and are actively being developed. Microfluidic systems, in which small volumes of fluids can be processed, provide an ideal platform on which to develop PoC diagnostic solutions. Specifically, the emerging field of paper-based microfluidics, with advantages such as low-cost, disposability and minimal external equipment requirements, provides unique opportunities for addressing healthcare issues in developing countries. This work explores the field of paper-based microfluidics, with step-by-step instructions on the design, manufacture and testing processes to realise paper-based devices towards diagnostic applications. Paper-based microfluidic and electronic components are presented, as well as the integration of these components to provide smart paper-based devices. This serves as an educational tool, enabling both beginners and experts in the field to fast-track development of unique paper-based solutions towards PoC diagnostics, with emphasis on the South African context, where both the need for and impact of these solutions are great.