No abstract

This article summarizes research involving the evaluation of the thermo-physical properties of ethylene- glycol-based solar thermic fluids oxidized multi-walled carbon nanotubes. Nanofluids were prepared with Ethylene glycol and water as base fluids in 100:0, 90:10 and 80:20 ratios. Base fluids of three categories were dispersed with surfactant-assisted multi-walled carbon nanotubes (MWCNTs) and oxidized MWCNTs in the weight fractions of 0.125, 0.25, and 0.5 percentages to check the influence of surface modification technique on the thermophysical properties. The variation in zeta potential is studied to examine the dispersion stability during 2 months. Thermal conductivity and dynamic viscosity were measured by hot disk method and Anton paar viscometer, respectively. Significant enhancement of thermal conductivity by 15 to 24 % was observed when the base fluids are dispersed with oxidized MWCNTs. In the case of nanofluids dispersed with surfactant-assisted MWCNTs, the improvement is significantly less compared to oxidized MWCNTs. Nanofluids' dynamic viscosity is found to be higher compared to base fluids in the temperature range of 50 to 70 oC. A comprehensive mathematical equation suitable for all weight fraction of MWCNTs and volume percentages of Ethylene glycol was developed, which can forecast the temperature range. The correlation could fit well with the experimental data in reasonable limits.

and TEM examination, B. A. Staples and J. D. Herzog for reviewing the report, H. C. Wood for hot isostatic pressing of the waste formulations, R. P. Bopp for MCC-1 leach testing, and S. R. Mickelsen for formatting the draft report..

No abstract

Results are reported on several new glass and glass-ceramic waste formulations for plutonium disposition. The approach proposed involves employing existing calcined high level waste (HLW) present at the Idaho Chemical Processing Plant (ICPP) as an additive to: 1) aid in the formation of a durable waste form and 2) decrease the attractiveness level of the plutonium from a proliferation viewpoint. The plutonium, PuO2, loadings employed were 15 wt% (glass) and 17 wt% (glass-ceramic). Results in the form of x-ray diffraction patterns, microstructure and durability tests are presented on cerium surrogate and plutonium loaded waste forms using simulated calcined HLW and demonstrate that durable phases, zirconia and zirconolite, contain essentially all the plutonium.