A headspace gas chromatographic approach based on flame ionization detection has been successfully developed for the determination of parts-per-billion levels of 2,4-dichlorophenol and 2,6-dichlorophenol in processed dairy milk. Under the right environmental conditions, these compounds are produced as products of the reductive dechlorination of pentachlorophenol. Maintaining a highly inert chromatographic system and employing a recently commercialized inert capillary column permits the analysis of 2,4-dichlorophenol and 2,6-dichlorophenol without derivatization. Further, a detection limit improvement of more than a factor of two was achieved by adding sodium sulfate to substantially decrease the solute partition coefficient in the matrix. A detection limit of 1 ng/g and a limit of quantitation of 2 ng/g were attained, and complete analysis can be conducted in < 13 min. Reproducibility of area counts over a range from 20 to 200 ng/g and over a period of 2 days were found to be less than 6% (n = 20). A linear range from 5 to 500 ng/g with a correlation coefficient of at least 0.9992 was obtained for 2,4-dichlorophenol and 2,6-dichlorophenol. Spike recoveries from 10 to 500 ng/g for all the analytes range from 92 to 102%.

No abstract

A practical and reliable method for the analysis of ethylene glycol in either hydrocarbon based or synthetic lubricants has been successfully developed and implemented. The method involves the use of static headspace gas chromatography and flame ionization detection. A fast and specific derivatization approach was incorporated, involving the use of phenyl boronic acid to convert ethylene glycol to 2-phenyl-1,3,2-dioxaborolane. With this analytical approach, a complete analysis can be conducted in less than 15 min with a relative precision of less than 10% at two concentrations; 100 ppm (w/w) and 1000 ppm (w/w) respectively. The method has a linear range from 5 ppm (w/w) to 1000 ppm (w/w) with a correlation co-efficient of 0.9993, a recovery greater than 95% and a detection limit of 1 ppm (w/w).

A fast and reliable approach for the measurement of sub parts-per-billion levels of targeted chlorinated compounds like tetrachloroethane, hexachloroethane, hexachlorobutadiene, pentachlorobenzene, and hexachlorobenzene in various water matrices such as waste water is described. The method employed a novel piston-cylinder-based micro liquid–liquid extraction technique using hexane as an extraction solvent. The device, known commercially as the MIXXOR, substantially accelerates extraction time by a factor of more than 100 times and reduces solvent consumption by a factor of 25 times when compared with the solvent extraction technique using wrist-action mechanical agitation. A recently introduced 6% cyanopropylphenyl –94% dimethylpolysiloxane capillary column offering a high degree of inertness was used for the separation of the analytes. A quadrupole mass spectrometer equipped with a triple-axis detector was also employed to enhance the instrument detection limit. With this technique, a complete separation for the analytes in water can be conducted in less than 10 min using a three-port SilFlow planar microfluidic device for back-flushing. Repeatability of retention times for all compounds were found to be less than 0.04% (n = 10). The compounds cited can be analyzed from 1 ng/mL to 10 μg/mL, with a detection limit and correlation coefficient of at least 0.5 ng/mL and 0.999, respectively. A relative precision of less than 1.2% relative standard deviation (RSD) (n = 20) at the 50 ng/mL level, with analyte recovery of greater than 99% (n = 3) from 10 ng/mL to 10 μg/mL, was obtained.