One of the ideas for development of Structural Health Monitoring (SHM) systems is based on excitation of elastic waves by a network of PZT piezoelectric transducers integrated with the structure. In the paper, a variant of the so-called Transfer Impedance (TI) approach to SHM is followed. Signal characteristics, called the Damage Indices (DIs), were proposed for data presentation and analysis. The idea underlying the definition of DIs was to maintain most of the information carried by the voltage induced on PZT sensors by elastic waves. In particular, the DIs proposed in the paper should be sensitive to all types of damage which can influence the amplitude or the phase of the voltage induced on the sensor. Properties of the proposed DIs were investigated experimentally using a GFRP composite panel equipped with PZT networks attached to its surface and embedded into its internal structure. Repeatability and stability of DI indications under controlled conditions were verified in tests. Also, some performance indicators for surface-attached and structure-embedded sensors were obtained. The DIs’ behavior was dependent mostly on the presence of a simulated damage in the structure. Anisotropy of mechanical properties of the specimen, geometrical properties of PZT network as well as, to some extent, the technology of sensor integration with the structure were irrelevant for damage indication. This property enables the method to be used for damage detection and classification.

The aim of this study was to obtain a superhydrophobic coating by modifying anodized aluminum using polydimethylsiloxane (PDMS). In order to obtain a superhydrophobic coating on an aluminum substrate, a multistage treatment was implemented. Specimens of aluminum were treated by abrasive blasting, anodization in sulfuric acid, impregnation by PDMS, rinsing in toluene to remove excess of PDMS, and curing. A rough surface with an additional low free energy layer on it resulted in a superhydrophobic effect. The coating obtained has an average contact angle of 159°. The specimens were tested in terms of durability in natural conditions. Additionally, anti-icing and anti-fouling properties were evaluated. The coating was compared with anodized aluminum obtained by a basic process.

No abstract

No abstract

The paper presents experimental verification of customized resistive crack propagation sensors as an alternative method for other common structural health monitoring (SHM) techniques. Most of these are sensitive to changes in the sensor network configuration and a baseline dataset must be collected for the analysis of the structure condition. Sensors investigated within the paper are manufactured by the direct-write process with electrically conductive, silver-microparticle-filled paint to prepare a tailored measuring grid on an epoxy or polyurethane coating as a driving/insulating layer. This method is designed to enhance the functionality and usability compared to commercially available crack gauges. By using paint with conductive metal particles, the shape of the sensor measuring grid can be more easily adapted to the structure, while, in the previous approach, only a few grid-fixed sensors are available. A fatigue test on the compact tension (CT) specimen is presented and discussed to evaluate the ability of the developed sensors to detect and monitor fatigue cracks. Additionally, the ARIMA time series algorithm is developed both for monitoring and predicting crack growth, based on the acquired data. The proposed sensors’ verification reveal their good performance to detect and monitor fatigue fractures with a relatively low measurement error and ARIMA estimated crack length compared with the crack opening displacement (COD) gauge.