Organic light emitting transistors (OLETs) combine, in the same device, the function of an electrical switch with the capability of generating light under appropriate bias conditions. In this work, we demonstrate how engineering the dielectric layer based on high-k polyvinylidene fluoride (PVDF)-based polymers can lead to a drastic reduction of device driving voltages and the improvement of its optoelectronic properties. We first investigated the morphology and the dielectric response of these polymer dielectrics in terms of polymer (P(VDF-TrFE) and P(VDF-TrFE-CFE)) and solvent content (cyclopentanone, methylethylketone). Implementing these high-k PVDF-based dielectrics enabled low-bias ambipolar organic light emitting transistors, with reduced threshold voltages (<20 V) and enhanced light output (compared to conventional polymer reference), along with an overall improvement of the device efficiency. Further, we preliminary transferred these fluorinated high-k dielectric films onto a plastic substrate to enable flexible light emitting transistors. These findings hold potential for broader exploitation of the OLET platform, where the device can now be driven by commercially available electronics, thus enabling flexible low-bias organic electronic devices.

Organic light-emitting transistors are photonic devices combining the function of an electrical switch with the capability of generating light under appropriate bias conditions. Achieving high-performance light-emitting transistors requires high-mobility organic semiconductors, optimized device structures, and highly efficient emissive layers. In this work, we studied the optoelectronic response of green blends (TCTA:Ir(ppy) 3 ) with varying doping concentrations in the limit of field-effect within a transistor device configuration. Increasing the dye concentration within the blend leads to a quenching of the photoluminescence signal; however, when implemented in a multilayer stack in a transistor, we observed an approximately 5-fold improvement in the light output for a 10% Ir(ppy) 3 doping blend. We analyzed our results in terms of balanced charge transport in the emissive layer, which, in the limit of field-effect (horizontal component), leads to an improved exciton formation and decay process. While the performances of our devices are yet to achieve the state-of-the-art diode counterpart, this work demonstrates that engineering the emissive layer is a promising approach to enhance the light emission in field-effect devices. This opens the way for a broader exploitation of organic light-emitting transistors as alternative photonic devices in several fields, ranging from display technology to flexible and wearable electronics.