Adequate surface preparation using pulsed lavage and copious drying of the tibial surface appears to be of overruling importance, thus limiting the effect of any particular technique applied to improve implant fixation. This study emphasises the fundamental importance of surface preparation and pulsed lavage in TKA.

Purpose Aseptic loosening of the tibial component remains a limitation to the highly successful procedure of total knee arthroplasty (TKA). Pulsed lavage improves bone cement penetration and interface strength in tibial tray cementation. This study tested whether pressurized cement application with a cement gun can compensate the use of jet lavage for bone surface preparation. Methods Tibial components were implanted in six pairs of cadaveric tibiae. On one side, pulsed lavage of the tibial bone was combined with finger packing of bone cement; on the other side, syringe lavage and gun cementing was used. Cement penetration into the bone was determined from computed tomography scans, and Interface strength was determined by pull-out testing. Results Cement penetration was greater (p=0.004) and interface strength was higher (p=0.028) in the pulsed lavage group. Conclusion Pressurization of cement by gun application could not compensate for the omission of pulsed lavage. Thus, pulsed lavage should be considered a crucial factor in TKA to improve implant fixation, which cannot be compensated for by cement application technique.

No abstract

No abstract

No abstract