Traditionally, interference is considered harmful. Wireless networks strive to avoid scheduling multiple transmissions at the same time in order to prevent interference. This paper adopts the opposite approach; it encourages strategically picked senders to interfere. Instead of forwarding packets, routers forward the interfering signals. The destination leverages network-level information to cancel the interference and recover the signal destined to it. The result is analog network coding because it mixes signals not bits. So, what if wireless routers forward signals instead of packets? Theoretically, such an approach doubles the capacity of the canonical 2-way relay network. Surprisingly, it is also practical. We implement our design using software radios and show that it achieves significantly higher throughput than both traditional wireless routing and prior work on wireless network coding.

This paper presents the design and implementation of the first in-band full duplex WiFi radios that can simultaneously transmit and receive on the same channel using standard WiFi 802.11ac PHYs and achieves close to the theoretical doubling of throughput in all practical deployment scenarios. Our design uses a single antenna for simultaneous TX/RX (i.e., the same resources as a standard half duplex system). We also propose novel analog and digital cancellation techniques that cancel the self interference to the receiver noise floor, and therefore ensure that there is no degradation to the received signal. We prototype our design by building our own analog circuit boards and integrating them with a fully WiFi-PHY compatible software radio implementation. We show experimentally that our design works robustly in noisy indoor environments, and provides close to the expected theoretical doubling of throughput in practice.

Opportunistic routing is a recent technique that achieves high throughput in the face of lossy wireless links. The current opportunistic routing protocol, ExOR, ties the MAC with routing, imposing a strict schedule on routers' access to the medium. Although the scheduler delivers opportunistic gains, it eliminates the clean layering abstraction and misses some of the inherent features of the 802.11 MAC. In particular, it prevents spatial reuse and thus may underutilize the wireless medium.This thesis presents MORE, a MAC-independent opportunistic routing protocol. MORE randomly mixes packets before forwarding them. This randomness ensures that routers that hear the same transmission do not forward the same packets. Thus, MORE needs no special scheduler to coordinate routers and can run directly on top of 802.11.We analyze the theoretical gains provided by opportunistic routing and present the EOTX routing metric which minimizes the number of opportunistic transmissions to deliver a packet to its destination.We implemented MORE in the Click modular router running on off-the-shelf PCs equipped with 802.11 (WiFi) wireless interfaces. Experimental results from a 20-node wireless testbed show that MORE's median unicast throughput is 20% higher than ExOR, and the gains rise to 50% over ExOR when there is a chance of spatial reuse.

Poor connectivity is common when we use wireless networks on the go. A natural way to tackle the problem is to take advantage of the multiple network interfaces on our mobile devices, and use all the networks around us. Using multiple networks at a time makes makes possible faster connections, seamless connectivity and potentially lower usage charges. The goal of this paper is to explore how to make use of all the networks with today's technology. Specifically, we prototyped a solution on an Android phone. Using our prototype, we demonstrate the benefits (and difficulties) of using multiple networks at the same time.

No abstract