Remote epitaxy via graphene has recently attracted significant attention, since it provides the possibility to lift-off the grown epitaxial layer, reuse the substrate, and produce flexible devices. However, extensive research is still necessary to fully understand the III-nitride formation on the van der Waals surface of a two-dimensional material and utilize remote epitaxy to its full potential. In this work, the growth of a GaN epilayer using a GaN/sapphire template covered with monolayer graphene is presented. Metalorganic vapor phase epitaxy is chosen to fabricate both the template and the nitride epilayer on top as a cost-effective approach toward GaN homoepitaxy. One-step and multi-step growth temperature protocols are demonstrated while paying particular attention to the graphene interface. GaN seed formation on graphene is analyzed to identify remote epitaxy. Crystalline quality improvement of the epilayer by adjusting the growth parameters is further discussed to provide useful insights into GaN growth on a GaN/sapphire template via monolayer graphene.

Successful transition to commercialization and practical implementation of nanotechnology innovations may very well need device designs that are tolerant to the inherent variations and imperfections in all nanomaterials including carbon nanotubes, graphene, and others. As an example, a single-walled carbon nanotube network based gas sensor is promising for a wide range of applications such as environment, industry, and biomedical and wearable devices due to its high sensitivity, fast response, and low power consumption. However, a long-standing issue has been the production of extremely high purity semiconducting nanotubes, thereby contributing to the delay in the market adoption of those sensors. Inclusion of even less than 0.1% of metallic nanotubes, which is inevitable, is found to result in a significant deterioration of sensor-to-sensor uniformity. Acknowledging the coexistence of metallic and semiconducting nanotubes as well as all other possible imperfections, we herein present a novel variation-tolerant sensor design where the sensor response is defined by a statistical Gaussian measure in contrast to a traditional deterministic approach. The single input and multiple output data are attained using multiport electrodes fabricated over a relatively large area single nanotube ensemble. The data processing protocol discards outlier data points and the origin of the outliers is investigated. Both the experimental demonstration and complementary analytical modeling support the hypothesis that the statistical analysis of the device can strengthen the credibility of the sensor constructed using nanomaterials with any imperfections. The proposed strategy can also be applied to physical, radiation, and biosensors as well as other electronic devices.

The current state of the art in direct water splitting in photo-electrochemical cells (PECs) is presented together with: (i) a case study of water splitting using a simple solar cell with the most efficient water splitting electrodes and (ii) a detailed mechanism analysis. Detailed analysis of energy balance and efficiency of solar hydrogen production are presented. The role of hydrogen peroxide formation as an intermediate in oxygen evolution reaction is newly revealed and explains why an oxygen evolution is not taking place at the thermodynamically expected 1.23 V potential.Solar hydrogen production with electrical-to-hydrogen conversion efficiency of 52% is demonstrated using a simple ∼0.7%-efficient n-Si/Ni Schottky solar cell connected to a water electrolysis cell. This case study shows that separation of the processes of solar harvesting and electrolysis avoids photo-electrode corrosion and utilizes optimal electrodes for hydrogen and oxygen evolution reactions and achieves ∼ 10% efficiency in light-to-hydrogen conversion with a standard 18% efficient household roof Si-solar cells.Keywords: solar hydrogen, conversion efficiency, solar-to-hydrogen conversion, oxygen and hydrogen evolution mechanisms Review: materials and cell configurationsA solar water splitting is decomposition of H 2 O molecules into molecular hydrogen and oxygen using solar energy. This process is expected to become foundation of a sustainable hydrogen-based energy economy, as it represents carbon-neutral way to produce hydrogen gas using the most abundant renewable resources, i.e., water and sunlight [1,2,3].

No abstract

Phone: þ370 5 219 3238BGaN epilayers were grown on GaN/sapphire templates in hydrogen atmosphere by metal organic chemical vapor deposition (MOCVD). The growth was attempted at different temperatures and flow rates of triethylboron, which was used as boron precursor. According to XRD measurements, up to 2.9% of boron was incorporated in 500 nm-thick BGaN layers deposited at 870 8C. Comparison of XRD results with the red shift observed in the photoluminescence band with increasing boron content confirms an extremely large value of $10 eV for the bowing parameter in BGaN.