Using five independent analytic and Monte Carlo simulation codes, we have studied the performance of wide field ground layer adaptive optics (GLAO), which can use a single, relatively low order deformable mirror to correct the wavefront errors from the lowest altitude turbulence. GLAO concentrates more light from a point source in a smaller area on the science detector, but unlike traditional adaptive optics, images do not become diffraction-limited. Rather the GLAO point spread function (PSF) has the same functional form as a seeing-limited PSF, and can be characterized by familiar performance metrics such as Full-Width Half-Max (FWHM). The FWHM of a GLAO PSF is reduced by 0.1 ′′ or more for optical and near-infrared wavelengths over different atmospheric conditions. For the Cerro Pachón atmospheric model this correction is even greater when the image quality is worst, which effectively eliminates "bad-seeing" nights; the best seeing-limited image quality, available only 20% of the time, can be achieved 60 to 80% of the time with GLAO. This concentration of energy in the PSF will reduce required exposure times and improve the efficiency of an observatory up to 30 to 40%. These performance gains are relatively insensitive to a number of trades including the exact field of view of a wide field GLAO system, the conjugate altitude and actuator density of the deformable mirror, and the number and configuration of the guide stars.

NFIRAOS, the Thirty Meter Telescope's first adaptive optics system is an order 60x60 Multi-Conjugate AO system with two deformable mirrors. Although most observing will use 6 laser guide stars, it also has an NGS-only mode. Uniquely, NFIRAOS is cooled to -30 °C to reduce thermal background. NFIRAOS delivers a 2-arcminute beam to three client instruments, and relies on up to three IR WFSs in each instrument. We present recent work including: robust automated acquisition on these IR WFSs; trade-off studies for a common-size of deformable mirror; real-time computing architectures; simplified designs for high-order NGS-mode wavefront sensing; modest upgrade concepts for highcontrast imaging.

The two GEMINI Multiple Object Spectrographs (GMOS) are being designed and built for use with the GEMINI telescopes on Mauna Kea and Cerro Pachon starting in 1999 and 2000 respectively. They have four operating modes : imaging, long slit spectroscopy, aperture plate multiple object spectroscopy and area (or integral field) spectroscopy. The spectrograph uses refracting optics for both the collimator and camera and uses grating dispersion. The image quality delivered to the spectrograph is anticipated to be excellent and the design is driven by the need to retain this acuity over a large wavelength range and the full 5.5 arcminute field of view. The spectrograph optics are required to perform from 0.36 to 1.8 microns although it is likely that the northern and southern versions of GMOS will use coatings optimised for the red and blue respectively. A stringent fiexure specification is imposed by the scientific requirement to measure velocities to high precision (1-2 km/s). Here we present an overview of the design concentrating on the optical and mechanical aspects.

No abstract

No abstract