No abstract

No abstract

No abstract

No abstract

The thermal performance of flat plate pulsating heat pipes with differentchannel geometries was performed in this experimental work. The testswere accomplished with two channel profiles, round and grooved. One ofthe channel geometries, located on the evaporator, can be considered novel,consisting of a round channel with two lateral grooves. Diffusion bondingtechnology was used to manufacture the PHPs made of two copper flatplates. Distilled water was used as the working fluid with a filling ratio of50% (17.9 ml) of the total volume. The pulsating heat pipes were tested atone position (vertical) under heat loads from 20 up to 2000 W. Theexperimental results showed that both flat plate pulsating heat pipesoperates successfully for high heat fluxes. The lateral grooves reduced thethermal resistance, being principally efficient in lower loads. Besides that,the novel channel considerably anticipated the operation startup. Therefore,a much better performance was obtained by the grooved channel PHP,which was constructed from a simple, low cost modification of thefabrication process.