To improve the detection sensitivity of metal ions in capillary zone electrophoresis (CZE), a novel method that combines complex formation and on-line sample preconcentration by sweeping was developed. Sweeping is defined as the picking and accumulating of analytes by a carrier in the background solution, with which they have considerable affinity. In this sweeping method, using ethylenediaminetetraacetic acid as carrier, dynamic complexation to form a UV-absorbing chelate and on-line preconcentration occur simultaneously during a run. The technique was validated in terms of the limit of detection, reproducibility, and sensitivity enhancement. Detection responses of some divalent metal ions, in terms of peak heights, were improved from 60- to 180-fold, relative to conventional CZE which employed precapillary complexation. The limits of detection were in the range of (1.8-23.4) x 10(-8) M. This method was applied to the analysis of trace metal ions in factory wastewater. Furthermore, sweeping in conjunction with sample stacking accompanying electrokinetic injection, cation-selective exhaustive injection (CSEI-sweeping), was also examined. Up to 140 000-fold improvement in detector responses for some divalent and trivalent metal ions was realized by CSEI-sweeping. The limits of detection were in the range (2.4-25.2) x 10(-11) M.

An application study of sweeping, an on-line sample concentration technique, to micellar electrokinetic chromatography (MEKC) directly combined with mass spectrometry (MS) using an atmospheric pressure chemical ionization (APCI) interface, namely MEKC-APCI-MS, was investigated to enhance the concentration sensitivity for the analysis of environmental pollutants. Under a neutral condition, around 100-fold increase in the concentration sensitivity was achieved for several aromatic amines and alkyl phthalates as test samples by sweeping-MEKC-APCI-MS compared to conventional MEKC-APCI-MS, whereas under an acidic condition, 100 to 600-fold sensitivity enhancement was gained for similar solutes. Linearity of the corrected peak area obtained in the mass chromatogram against the sample concentration was examined for 3,4-dichloroaniline and diisopropyl phthalate (DIPP). The estimated limits of detection for 3,4-dichloroaniline and DIPP were 0.6 and 0.4 ppm, respectively, in terms of the injected sample concentration.

Micellar electrokinetic chromatography (MEKC) using a cationic surfactant as a pseudostationary phase was examined to separate anionic metal cyclohexane-1,2-diaminetetraacetic acid (CDTA) complexes. Cetyltrimethylammonium chloride (CTAC) was employed as the cationic surfactant micelle, its addition leading to EOF reversal. Cu(II), Co(II), Zn(II), Mn(II) and Pb(II) were used as test analytes, and the complete separation was obtained by MEKC. On-line sample preconcentration by sweeping was also examined to improve the detection sensitivity. From 15-to 42-fold increases in the detection sensitivity in terms of the peak heights were obtained by sweeping with a cationic micelle in the presence of high EOF. The limits of detection were in the range (0.6 -1.8) × 10 -6 M with UV detection without any off-line preconcentration step.

No abstract

No abstract