No abstract

Electron beam lithography (EBL) requires conducting substrates to ensure pattern fidelity. However, there is an increasing interest in performing EBL on less well-conducting surfaces or even insulators, usually resulting in seriously distorted pattern formation. To understand the underlying charging phenomena, the authors use Monte Carlo simulations that include models for substrate charging, electron beam-induced current, and electric breakdown. Simulations of electron beam exposure of glass wafers are presented, exposing regular patterns which become distorted due to charge-induced beam deflection. The resulting displacements within the patterns are mapped and compared to experimental displacement maps obtained from patterns in PMMA resist on glass substrates. Displacements up to several hundreds of nanometers were observed at a primary beam energy of 50 keV. Also, various scan strategies were used to write the patterns, in the simulations as well as the experiments, revealing their strong effect on pattern distortion, in shape and in magnitude. A qualitative, in some cases even quantitative, good agreement was found between the simulations and the experiments, providing enough confidence in Monte Carlo simulations to predict charge-induced pattern displacement and shape distortion and to find smart scan strategies to minimize the effects of charging.

No abstract

Scanning electron microscopy (SEM) is one of the most common inspection methods in the semiconductor industry and in research labs. To extract the height of structures using SEM images, various techniques have been used, such as tilting a sample, or modifying the SEM tool with extra sources and/or detectors. However, none of these techniques focused on extraction of height information directly from top-down images. In this work, using Monte Carlo simulations, we studied the relation between step height and the emission of secondary electrons (SEs) resulting from exposure with primary electrons at different energies. It is found that part of the SE signal, when scanning over a step edge, is determined by the step height rather than the geometry of the step edge. We present a way to quantify this, arriving at a method to determine the height of structures from top-down SEM images. The method is demonstrated on three different samples using two different SEM tools, and atomic force microscopy is used to measure the step height of the samples. The results obtained are in qualitative agreement with the results from the Monte Carlo simulations.

There is a growing interest for patterning on curved or tilted surfaces using electron beam lithography. Computational proximity correction techniques are well established for flat surfaces and perpendicular exposure, but for curved and tilted surfaces adjustments are needed as the dose distribution is no longer cylindrically symmetric with respect to the surface normal. A graphical processing unitaccelerated 3D Monte Carlo simulation, based on first-principle scattering models, is used to simulate the asymmetric dose distribution. Based on that, an approximate adjustment is made to an existing high-performance proximity effect correction (PEC) algorithm aimed at the correct exposure of a pattern of nanowires on a 17°tilted surface. It was experimentally verified that using the adjusted PEC indeed leads to a more uniform exposure on tilted surfaces.