One of the most prevalent causes of bridge failure around the world is "scour"-the gradual erosion of soil around a bridge foundation due to fast-flowing water. A reliable technique for monitoring scour would help bridge engineers take timely countermeasures to safeguard against failure. Although vibration-based techniques for monitoring structural damage have had limited success, primarily due to insufficient sensitivity, these have tended to focus on the detection of local damage. High natural frequency sensitivity has recently been reported for scour damage. Previous experiments to investigate this have been limited as a result of the cost of full-scale testing and the fact that scaled-down soil-structure models tested outside a centrifuge do not adequately simulate full-scale behaviour. This paper describes the development of what is believed to be the first-ever centrifuge-testing programme to establish the sensitivity of bridge natural frequency to scour. A 1/60 scale model of a two-span integral bridge with 15 m spans was tested at varying levels of scour. For the fundamental mode of vibration, these tests found up to a 40% variation in natural frequency for 30% loss of embedment. Models of three other types of foundation, which represent a shallow pad foundation, a deep pile bent and a deep monopile, were also tested in the centrifuge at different scour levels. The shallow foundation model showed lower frequency sensitivity to scour than the deep foundation models. Another important finding is that the frequency sensitivity to "global scour" is slightly higher than the sensitivity to "local scour", for all foundation types. The level of frequency sensitivity (3.1-44% per scour depth equivalent to 30% of embedment of scour) detected in this experiment demonstrates the potential for using natural frequency as an indicator of both local and global scour of bridges, particularly those with deep foundations.

No abstract

No abstract

No abstract

<p>Monitoring bridges for precursors of failure has the potential to improve their safety and resilience. However, the most prominent cause of bridge failure, scour, is difficult to monitor as it occurs underwater. The potential to identify scour by monitoring changes in the natural frequencies of a bridge is studied experimentally in this research. A field study was carried out on a bridge with pre- existing scour confined to a section of a piled pier foundation, which was monitored throughout a repair process involving controlled backfilling of the scoured region, i.e. scour in reverse. The changes in natural frequency due to backfilling of the scour hole were unable to be captured experimentally as the estimated magnitudes (9% and 6 % for the first and second modes respectively) were of the same order as the variability of the natural frequency estimates. In order to study the relationship between natural frequency and scour in a more controlled environment, a geotechnical centrifuge experiment was conducted to simulate scour in a small-scale integral bridge model in dense sand. The model showed a significant (up to 40 %) change in natural frequency as a result of a scour depth equivalent to 30 % of the piled foundation depth. These experimental findings suggest that natural frequencies can potentially aid in detecting extensive bridge scour for piled foundations, but it may be challenging to detect localised scour limited to only a small portion of a foundation.</p>