A highly soft, stretchable, and sticky polydimethylsiloxane-based elastomer is achieved by adding small fractions of an amine-based polymer. The modified elastomer is tuned with a simple mixing step and shows good processability for microstructure fabrication. The modified elastomer shows excellent compatibility with an epidermal strain sensor on human skin.

We developed a new approach to separate bacteria from human blood cells based on soft inertial force induced migration with flow defined curved and focused sample flow inside a microfluidic device. This approach relies on a combination of an asymmetrical sheath flow and proper channel geometry to generate a soft inertial force on the sample fluid in the curved and focused sample flow segment to deflect larger particles away while the smaller ones are kept on or near the original flow streamline. The curved and focused sample flow and inertial effect were visualized and verified using a fluorescent dye primed in the device. First the particle behaviour was studied in detail using 9.9 and 1.0 µ m particles with a polymer-based prototype. The prototype device is compact with an active size of 3 mm 2 . The soft inertial effect and deflection distance were proportional to the fluid Reynolds number (Re) and particle Reynolds number (Re p ), respectively. We successfully demonstrated separation of bacteria (Escherichia coli) from human red blood cells at high cell concentrations (above 10 8 /mL), using a sample flow rate of up to 18 µL/min. This resulted in at least a 300-fold enrichment of bacteria at a wide range of flow rates with a controlled flow spreading. The separated cells were proven to be viable.Proteins from fractions before and after cell separation were analyzed by gel electrophoresis and staining to verify the removal of red blood cell proteins from the bacterial cell fraction. This novel microfluidic process is robust, reproducible, simple to perform, and has a high throughput compared to other cell sorting systems. Microfluidic systems based on these principles could easily be manufactured for clinical laboratory and biomedical applications.3

Recently, microfluidic stretchable electronics has attracted great interest from academia since conductive liquids allow for larger cross-sections when stretched and hence low resistance at longer lengths. However, as a serial process it has suffered from low throughput, and a parallel processing technology is needed for more complex systems and production at low costs. In this work, we demonstrate such a technology to implement microfluidic electronics by stencil printing of a liquid alloy onto a semi-cured polydimethylsiloxane (PDMS) substrate, assembly of rigid active components, encapsulation by pouring uncured PDMS on-top and subsequent curing. The printing showed resolution of 200 μm and linear resistance increase of the liquid conductors when elongated up to 60%. No significant change of resistance was shown for a circuit with one LED after 1000 times of cycling between a 0% and an elongation of 60% every 2 s. A radio frequency identity (RFID) tag was demonstrated using the developed technology, showing that good performance could be maintained well into the radio frequency (RF) range.

We present a 2.4 GHz unbalanced loop antenna that can be stretched along multiple dimensions simultaneously. It was realized by incorporating room temperature liquid metal alloy into microstructured channels in an elastic material. The demonstrated prototype exhibits a stretchability of up to 40% along two orthogonal orientations as well as foldability and twistability. Port impedance and radiation characteristics of the nonstretched and stretched antenna were studied numerically and experimentally. Measured results indicate a radiation efficiency of more than 80%.

No abstract