Electromagnetic forming is a method of high-speed metal workpiece forming technology that uses electromagnetic force pulses generated from the interaction of the magnetic flux density and workpiece induced eddy current. The main challenge of this technology is the control of the eddy current and magnetic flux density to perform various forming processes. This paper is aimed at overcoming this challenge by introducing a new electromagnetic sheet forming method based on discretely driven rings. In this method, a set of discrete conducting rings are placed between the driving coil and the metal workpiece to enhance the shaping process of the workpiece. By changing the number and position of the rings, the induced eddy current can be adjusted, and different electromagnetic force distribution profiles can be realized. COMSOL software is used to develop an electromagnetic field-structure coupling model of the proposed electromagnetic forming method. The characteristics of the electromagnetic force distribution and its effect on the workpiece forming process are analyzed. Results show that the electromagnetic force distribution profile can be controlled by adjusting the rings physical parameters such as diameter, material, and position. The proposed method can effectively improve the performance of the conventional electromagnetic forming technology and has the potential for implementation in wide industry applications.
Due to the fact that geometrical structure of tube electromagnetic bulging process with field shaper does not conform to the axisymmetric property, three-dimensional (3D) model is usually used to analyze the process which is complicated and time consuming. Therefore, on the basis of understanding the working principle of the field shaper, a two-dimensional (2D) model with current constraint is proposed in this paper to analyze the electromagnetic bulging process of a tube fitted with a field shaper. COMSOL finite element analysis software is used to develop three models for performance analysis and comparison, these are: conventional 3D model and the proposed 2D model with and without current constraint. Simulation results show that the induced eddy current density, magnetic flux density and electromagnetic body density of the two-dimensional model with current constraint are in good agreement with the results of the threedimensional model. This provides an alternative and effective way to analyze the performance of the tube electromagnetic bulging with field shaper using a simple but yet reliable 2D model. INDEX TERMS Electromagnetic forming, Field shaper, Lightweight alloy, Finite element analysis.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.