No abstract

Three relatively new applications for controlling wind and water erosion using polyacrylamide copolymers arc described that take advantage of their ability to stabilize and add structure to soil. In the first application, low concentrations of anionic, high purity polyacrylamide (PAM) eliminates sediment in runoff water by more than 90% when added to irrigation water at 10 ppm, or at a rate of 1 to 2 kg ha-1 per irrigation. Lab-furrow tests were utilized to characterize the role of molecular weight. charge, and ion concentrations in applying PAM during irrigation. In the second application, PAM is applied at construction sites and road cuts at rates of 22.5 kg ha -2 (tenfold higher rates than in irrigation control) resulting in reduction in sediment runoff by 60-85% during (simulated) heavy rains. Finally, a formulation of PAM mixed with aluminum chlorohydrate and cross-linked poly(acrylic acid) superabsorbent at a ratio of (6:1:1) has been applied to create helicopter landing pads that minimize dust clouds during helicopter operation. This formulation was specifically developed to minimize dust clouds during landing of helicopters in fine, and soils such as those potentially encountered in the Middle East. A biodegradable alternative to PAM, acid-hydrolyzed cellulose microfibrils, was tested in lab-scale furrows and was less effective than PAM at similar concentrations, but show promises. Microtibrils reduce sediment run-off in lab-furrow tests by 88% when applied at eight-to tenfold the concentration of PAM.

Three types of composites, namely, polylactide (PLA)/nanoclay, PLA/core–shell rubber, and PLA/nanoclay/core–shell rubber, were melt compounded via a corotating twin‐screw extruder. The effects of two types of organically modified montmorillonite nanoclays (i.e., Cloisite®30B and 20A), two types of core (polybutylacrylate)–shell (polymethylmethacrylate) rubbers (i.e., Paraloid EXL2330 and EXL2314), and the combination of nanoclay and rubber on the mechanical and thermal properties of the composites were investigated. According to X‐ray diffraction and transmission electron microscopy analyses, both types of PLA/5 wt% nanoclay composites had an intercalated morphology. In comparison with pure PLA, both types of PLA/5 wt% nanoclay composites had an increased modulus, similar impact strength, slightly reduced tensile strength, and significantly reduced strain at break. On the other hand, PLA/EXL2330 composites with a rubber loading level of 10 wt% or higher had a much higher impact strength and strain at break, but a lower modulus and strength when compared with pure PLA. The simultaneous addition of 5 wt% nanoclay (Cloisite®30B) and 20 wt% EXL2330 resulted in a PLA composite with a 134% increase in impact strength, a 6% increase in strain at break, a similar modulus, and a 28% reduction in tensile strength in comparison with pure PLA. POLYM. ENG. SCI. 46:1419–1427, 2006. © 2006 Society of Plastics Engineers

Bone sections including either titanium or porous tantalum implant devices used for interbody spinal fusion were investigated with position-resolved small angle X-ray scattering (sSAXS). The samples were obtained from sixmonth-old pigs that had undergone surgery three months prior to sacrifice. The aim of the study was to explore the possibility of using sSAXS to obtain information about thickness, orientation and shape/arrangement of the mineral crystals in bone near the implant surfaces. Detailed sSAXS scans were carried out in two different regions of bone adjacent to the implant in each of the implant samples. In the implant vicinity the mineral crystals tended to be aligned with the surface of the implants. The mean crystal thickness was between 2.1 and 3.0 nm. The mineral crystal thickness increased linearly with distance from the implant in both regions of the porous tantalum implant and in one of the regions in the titanium sample. In the second region of the titanium sample the thickest mineral crystals were found close to the implant surface. The observed differences in mineral thickness with distance from the implant surfaces might be explained by differences in mechanical load induced by the implant material and the geometrical design of the implant. The study shows that sSAXS is a powerful tool to characterize the nanostructure of bone near implant surfaces.