No abstract

Biomass-based carbon nanofibers (CNF) were synthesized using lignin extracted from sawdust and polyacrylonitrile (PAN) (30:70) with the help of the electrospinning method and subsequent stabilization at 220 °C and carbonization at 800, 900, and 1000 °C. The synthesized CNFs were studied by scanning electron microscopy, energy-dispersive X-ray analysis, Raman spectroscopy, and the Brunauer–Emmett–Teller method. The temperature effect shows that CNF carbonized at 800 °C has excellent stability at different current densities and high capacitance. CNF 800 in the first test cycle at a current density of 100 mA/g shows an initial capacity of 798 mAh/g and an initial coulomb efficiency of 69.5%. The CNF 900 and 1000 show an initial capacity of 668 mAh/g and 594 mAh/g, and an initial Coulomb efficiency of 52% and 51%. With a long cycle (for 500 cycles), all three samples at a current density of 500 mA/g show stable cycling in different capacities (CNF 800 in the region of 300–400 mAh/g, CNF 900 and 1000 in the region of 100–200 mAh/g).

The present paper aimed at the investigation of the effect of preliminary acid treatment on the structure and purity of extracted silica. In this study, the acid leaching of rice husk (RH) in 2 M hydrochloric acid solution before the calcination process at 600 • C was proposed to achieve completely white silica with high specific surface area and low content of impurities. RH, selected from the Almaty Region, Kyzylorda Region, and Turkestan Region was used as the main silica source. The results confirmed that the highest purity (98.2%-99.7%) amorphous silica with a specific surface area between 120 and 980 m 2 g −1 could be extracted during acid treatment and controlled calcination. The structure is amorphous, porosity diameter decreased from 26.4 nm to 0.9 nm, and specific pore volume increased from 0.5 to 1.2 cm 3 g −1 .