Datacenter workloads demand high computational capabilities, flexibility, power efficiency, and low cost. It is challenging to improve all of these factors simultaneously. To advance datacenter capabilities beyond what commodity server designs can provide, we have designed and built a composable, reconfigurable fabric to accelerate portions of large-scale software services. Each instantiation of the fabric consists of a 6x8 2-D torus of high-end Stratix V FPGAs embedded into a half-rack of 48 machines. One FPGA is placed into each server, accessible through PCIe, and wired directly to other FPGAs with pairs of 10 Gb SAS cables.In this paper, we describe a medium-scale deployment of this fabric on a bed of 1,632 servers, and measure its efficacy in accelerating the Bing web search engine. We describe the requirements and architecture of the system, detail the critical engineering challenges and solutions needed to make the system robust in the presence of failures, and measure the performance, power, and resilience of the system when ranking candidate documents. Under high load, the largescale reconfigurable fabric improves the ranking throughput of each server by a factor of 95% for a fixed latency distributionor, while maintaining equivalent throughput, reduces the tail latency by 29%.

Datacenter workloads demand high computational capabilities, flexibility, power efficiency, and low cost. It is challenging to improve all of these factors simultaneously. To advance datacenter capabilities beyond what commodity server designs can provide, we designed and built a composable, reconfigurable hardware fabric based on field programmable gate arrays (FPGA). Each server in the fabric contains one FPGA, and all FPGAs within a 48-server rack are interconnected over a low-latency, high-bandwidth network. We describe a medium-scale deployment of this fabric on a bed of 1632 servers, and measure its effectiveness in accelerating the ranking component of the Bing web search engine. We describe the requirements and architecture of the system, detail the critical engineering challenges and solutions needed to make the system robust in the presence of failures, and measure the performance, power, and resilience of the system. Under high load, the large-scale reconfigurable fabric improves the ranking throughput of each server by 95% at a desirable latency distribution or reduces tail latency by 29% at a fixed throughput. In other words, the reconfigurable fabric enables the same throughput using only half the number of servers.

As silicon technologies move into the nanometer regime, transistor reliability is expected to wane as devices become subject to extreme process variation, particle-induced transient errors, and transistor wear-out. Unless these challenges are addressed, computer vendors can expect low yields and short mean-timesto-failure. In this paper, we examine the challenges of designing complex computing systems in the presence of transient and permanent faults. We select one small aspect of a typical chip multiprocessor (CMP) system to study in detail, a single CMP router switch. To start, we develop a unified model of faults, based on the time-tested bathtub curve. Using this convenient abstraction, we analyze the reliability versus area tradeoff across a wide spectrum of CMP switch designs, ranging from unprotected designs to fully protected designs with online repair and recovery capabilities. Protection is considered at multiple levels from the entire system down through arbitrary partitions of the design. To better understand the impact of these faults, we evaluate our CMP switch designs using circuit-level timing on detailed physical layouts. Our experimental results are quite illuminating. We find that designs are attainable that can tolerate a larger number of defects with less overhead than naïve triple-modular redundancy, using domain-specific techniques such as end-to-end error detection, resource sparing, automatic circuit decomposition, and iterative diagnosis and reconfiguration.

No abstract