No abstract

We propose a new in-plane switching (IPS) nematic liquid crystal (LC) mode which uses a twist effect with a hybrid LC alignment and interdigitated electrodes as an approach for a high brightness. This is optimized to a normally white mode to minimize loss of transmittance at the electrode compared to the conventional IPS mode. The proposed mode shows an excellent dark state because the bulk LCs are aligned in parallel to the optic axis of the polarizer under low electric fields. Consequently, this proposed mode exhibits a much higher contrast ratio (980:1) than that of the conventional IPS mode (550:1).

Photoacid generators (PAGs) have been widely used as a key material in the development of novel photoresist materials. One of the important uses of PAGs is found in chemically amplified photoresists (CARs) because of their high photosensitivity and high resolution capability. Triphenylsulfonium salt methacrylate (TPSMA) as the PAG has been bounded in the main polymer backbone. TPSMA was employed for synthesis of terpolymers, poly(MMA-co-tBVPC-co-TPSMA) and poly(tBVPC-co-tBOCPOMI-co-TPSMA) as a positive tone photoresists by free radical polymerization using AIBN. Terpolymers with various ratio of TPSMA, MMA, tBVPC and tBOCOPMI were synthesized and well characterized by FTIR, NMR. Molecular weight distribution was analyzed by GPC. Thermal properties were studied using TGA, DSC which showed thermal stability of terpolymer up to 150 degrees C. We have applied E-beam lithography and KrF lithography in order to demonstrate the effect of the polymer bounded PAG resists. These positive tone resists were successfully applied for fabrication of nano-scale patterns.

We developed novel substrate adhesion technique using thermosetting resin to apply roll‐to‐roll process to manufacturing of LCDs. We can use one‐drop‐filling (ODF) process without any distortion of LC alignment using the mixture of thermosetting resin and tetrahydrofuran(THF). This technique can be used to roll‐to‐roll process for flexible LCDs.