Optical properties and frequency upconversion fluorescence in a Tm3+ -doped alkali niobium tellurite glassThree thulium doped tellurite glass compositions have been investigated. The 1470 nm transition is radiative in these tellurite glasses and the radiative lifetimes are in the range of 350 to 470 s. The 1470 nm fluorescence is broad with a full width at half maximum of 105 nm. Fibers have been drawn from these glasses with a loss of 0.7 dB/m at 1300 nm. A fiber with an OH fundamental absorption of 200 dB/m at 2.99 m has an OH first overtone absorption of 0.3 dB/m at 1480 nm. The overlap between the thulium ion 1470 nm emission and the hydroxyl absorption depends on glass composition. Tellurite glasses can accept large concentrations of Tm 3ϩ ions and, as long as the hydroxyl level can be kept low, the effect of concentration quenching can be minimized. Tm 3ϩ -doped tellurite glasses represent a viable alternative for the next generation of active components for S-band optical amplifiers. It can be pumped at 795 nm with an absorption of ϳ38 dB/km/ppm and codoped with Ho 3ϩ to avoid self-termination of the 1470 nm transition. It can also be pumped at 1212 nm as efficiently as at 795 nm, but diodes are not yet available at this wavelength. Using available pump wavelengths of 1064 nm and 1047 nm will require fiber lengths 15 times longer than pumping at 1212 nm.

Colloidal gold spheres of radius 10 nm are reported to move forward in water, under the influence of radiation pressure forces, due to the evanescent field at the surface of an optical channel waveguide. The velocity is linearly dependent upon the optical power in the waveguide, acquiring a maximum velocity of 4 μm/s for modal power of 500 mW in the TM polarization at a wavelength of λ=1.047 μm.

No abstract

Abstract-We report on the optimization of a waveguide structure for the maximization of the radiation forces exerted on a Rayleigh particle in the cover region. The two main radiation forces involved are the transverse gradient force which attracts a particle into the waveguide and the combined scattering and dissipative forces which drive the particle forward along the channel. The dependence of these forces on parameters including the incident wavelength, the surrounding medium embedding the particles, and the polarizability of the particles is discussed. Both dielectric and metallic gold spheres of radius 10 nm are considered in the model. Special emphasis is devoted to the maximization of the transverse gradient force due to the optical intensity gradient at the waveguide surface, and the wavelength dependence of the polarizability of gold nanoparticles.

No abstract