This paper presents the first case study of integration of reflectometry antennas and waveguides located at several poloidal angular positions covering a full poloidal section of the Helium Cooled Lithium Lead breading blanket. The integration shall satisfy strong machine driven constraints (in addition to the physics performance). Diagnostic components installed in the blanket segments must: i) survive for the all period between blanket replacement, ii) be remote handling (RH) compatible with blanket, iii) behave thermomechanical as the blanket structure, iv) cross with integrity the vacuum and reference boundaries (vessel/cryostat/building) and tolerate their relative displacements and v) be compatible with the blanket shielding and cooling services. The present solution developed so far respects several of the main constraints namely, RH compatibility with the full blanket segment and its thermomechanical properties and cooling compatibility but also identifies important issues on the interfaces between the diagnostic antennae extensions and the pipe services at the vessel and also interfaces between vessel and cryostat requiring challenging RH and self-alignment solutions to be demonstrated. Monte Carlo neutronic simulations have been done in order to evaluate the heat loads and shielding capabilities of the system. The first results indicate that the cooling for the EUROFER diagnostic components (antennas and waveguides) can in principle be provided by the blanket cooling services (He is considered) via connection to the main Back Supporting Structure (BSS) and routed via the main diagnostic structure body to specific hot spots in the antennas.

No abstract