We present two novel fluidic concepts to drastically accelerate the process of mixing in batch-mode (stopped-flow) on centrifugal microfluidic platforms. The core of our simple and robust setup exhibits a microstructured disk with a round mixing chamber rotating on a macroscopic drive unit. In the first approach, magnetic beads which are prefilled into the mixing chamber are periodically deflected by a set of permanent magnets equidistantly aligned at spatially fixed positions in the lab-frame. Their radial positions alternatingly deviate by a slight positive and negative offset from the mean orbit of the chamber to periodically deflect the beads inbound and outbound during rotation. Advection is induced by the relative motion of the beads with respect to the liquid which results from the magnetic and centrifugal forces, as well as inertia. In a second approach--without magnetic beads--the disk is spun upon periodic changes in the sense of rotation. This way, inertia effects induce stirring of the liquids. As a result, both strategies accelerate mixing from about 7 minutes for mere diffusion to less than five seconds. Combining both effects, an ultimate mixing time of less than one second could be achieved.

In this paper, we present a novel and fully integrated centrifugal microfluidic "lab-on-a-disk" for rapid colorimetric assays in human whole blood. All essential steps comprising blood sampling, metering, plasma extraction and the final optical detection are conducted within t=150 s in passive, globally hydrophilized structures which obviate the need for intricate local hydrophobic surface patterning. Our technology features a plasma extraction structure (V=500 nL, CV<5%) where the purified plasma (cRBC<0.11%) is centrifugally separated, metered by an overflow and subsequently extracted by a siphon-based principle through a hydrophilic extraction channel into the detection chamber.

We present a novel microfluidic concept to enable a fast colorimetric alcohol assay from a single droplet of whole blood. The reduced turn-around time of 150 seconds is, on the one hand, achieved by a full process integration including metering, mixing with reagents, and sedimentation of cellular constituents. On the other hand, our novel total internal reflection (TIR) scheme allows to monitor the increase of the absorbance values in real-time. Thus, the saturation values can be predicted accurately based on an extrapolation of real-time measurements acquired during a 100 second initial period of rotation. Additionally, we present a metering structure to define nanolitre sample volumes at a coefficient of variation (CV) below 5%.

This study presents a straightforward two-step fabrication process of durable, completely superhydrophobic microchannels in PDMS. First, a composite material of PDMS/PTFE particles is prepared and used to replicate a master microstructure. Superhydrophobic surfaces are formed by subsequent plasma treatment, in which the PDMS is isotropically etched and PTFE particles are excavated. We compare the advancing and receding contact angles of intrinsic PDMS samples and composite PTFE/PDMS samples (1 wt %, 8 wt %, and 15 wt % PTFE particle concentration) and demonstrate that both the horizontal and vertical surfaces are indeed superhydrophobic. The best superhydrophobicity is observed for samples with a PTFE particle concentration of 15 wt %, which have advancing and receding contact angles of 159° ± 4° and 158° ± 3°, respectively.