According to the communication principle of 840D numerical control (NC) system and internal data structure, the PLC program is developed to make 840D system state data transmit to the PC with the MPI channels; production status data real-time monitoring system based on 840D NC machine tools is developed, meanwhile, the monitoring and data management for NC machine tool production process status is realized.

With the development of offshore oil and gas field enters into deep water constantly, subsea production system has become the main development mode in deep water development. Pipeline End Termination (PLET) is common facilities in subsea production system and is used to provide subsea tieback interface. An embedded type PLET has been adopted in Panyu 35-1/35-2 Gas field with the water depth of 194 to 338 m. Factory Accept Test (FAT) is very important for the subsea production facilities, and the references is very limited due to technical security. This paper in detail states the flow chart, master equipment, purpose and precautions for each test of FAT for PLET, which collects great technology for the development of subsea production system.

With the development of offshore oil and gas field enters into deep water constantly, subsea production system has become the main development mode in deep water development. Subsea Inline manifold (ILM) is common facilities in subsea production system and is used to gather oil and gas from the side subsea wells. Two subsea ILMs has been adopted in Panyu 35-1/35-2 Gas field with water depth range from 194 to 338 m in South China Sea. System integration test (SIT) is very important for the subsea production facilities. This paper states the flow chart, master equipment, purpose and precautions for each test of ILM SIT, which collects great technology for the development of subsea production system.