Experimental section, discussion on high current density and heat rejection limit, and physical and electrochemical properties of different carbon supports (PDF)

No abstract

No abstract

Cu-catalyzed selective electrocatalytic upgrading of carbon dioxide/monoxide to valuable multicarbon oxygenates and hydrocarbons is an attractive strategy for combating climate change. Despite recent research on Cu-based catalysts for the CO2 and CO reduction reactions, surface speciation of the various types of Cu surfaces under reaction conditions remains a topic of discussion. Herein, in situ surface-enhanced Raman spectroscopy (SERS) is employed to investigate the speciation of four commonly used Cu surfaces, i.e., Cu foil, Cu micro/nanoparticles, electrochemically deposited Cu film, and oxide-derived Cu, at potentials relevant to the CO reduction reaction in an alkaline electrolyte. Multiple oxide and hydroxide species exist on all Cu surfaces at negative potentials, however, the speciation on the Cu foil is distinct from that on micro/nanostructured Cu. The surface speciation is demonstrated to correlate with the initial degree of oxidation of the Cu surface prior to the exposure to negative potentials. Combining reactivity and spectroscopic results on these four types of Cu surfaces, we conclude that the oxygen containing surface species identified by Raman spectroscopy are unlikely to be active in facilitating the formation of C2+ oxygenates in the CO reduction reaction.

Nanostructured carbides are refractory materials with high surface areas that could be used as alternatives to the oxide materials that are widely used as support materials for heterogeneous catalysts. Carbides are also catalytically active for a variety of reactions, offering additional opportunities to tune the overall performance of the catalyst. In this paper we describe the synthesis of molybdenum carbide supported platinum (Pt/Mo(2)C) catalysts and their rates for the water gas shift reaction. The synthesis method allowed interaction of the metal precursor with the native, unpassivated support. The resulting materials possessed very high WGS rates and atypical Pt particle morphologies. Under differential conditions, rates for these catalysts were higher than those for the most active oxide-supported Pt catalysts and a commercial Cu-Zn-Al catalyst. Experimental and computational results suggested that active sites on the Pt/Mo(2)C catalysts were located on the perimeter of the Pt particles and that strong interactions between Pt and the Mo(2)C surface gave rise to raft-like particles.