An RF phased array applicator has been constructed for hyperthermia treatments in the intact breast. This RF phased array consists of four antennas mounted on a Lexan water tank, and geometric focusing is employed so that each antenna points in the direction of the intended target. The operating frequency for this phased array is 140 MHz. The RF array has been characterized both by electric field measurements in a water tank and by electric field simulations using the finite-element method. The finite-element simulations are performed with HFSS software, where the mesh defined for finite-element calculations includes the geometry of the tank enclosure and four end-loaded dipole antennas. The material properties of the water tank enclosure and the antennas are also included in each simulation. The results of the finite-element simulations are compared to the measured values for this configuration, and the results, which include the effects of amplitude shading and phase shifting, show that the electric field predicted by finite-element simulations is similar to the measured field. Simulations also show that the contributions from standing waves are significant, which is consistent with measurement results. Simulated electric field and bio-heat transfer results are also computed within a simple 3D breast model. Temperature simulations show that, although peak temperatures are generated outside the simulated tumour target, this RF phased array applicator is an effective device for regional hyperthermia in the intact breast.

Acoustic metasurfaces have enabled unprecedented control over acoustic waves, offering opportunities in areas such as holographic rendering, sound absorption, and acoustic communication. Despite the steady progress made in this field, most acoustic metasurface designs are passive in that they only provide static functionalities. Here, a reconfigurable active acoustic metalens is implemented to showcase scanning of the focus along arbitrary trajectories in free space with the help of a previously developed active acoustic metasurface platform. Each unit cell of the metasurface contains a cavity, whose size can be tuned continuously by a dynamic control system to adjust the phase of the reflected wave. While this work focuses on beam focusing, it could hold great promise for a wide range of applications including acoustic levitation and tweezers.

No abstract

No abstract

Fabricating materials with customized characteristics for both electromagnetic (EM) and acoustic waves remain a significant challenge using the current technology, since the demand of multiphysical manipulation requires a variety of material parameters that are hard to satisfy in nature. However, the emergence of artificially structured materials provides a new degree of freedom to tailor the wave–matter interactions in dual physical domains at the subwavelength scale. Here, a bifunctional digital coding metamaterial (MM) is proposed to engineer the propagation behaviors of EM and acoustic waves simultaneously and independently. Four kinds of rigid pillars with various material properties are employed to serve as 1-bit reflection-type digital meta-atoms with antiphase responses in both frequency spectra, thus offering the opportunities for independent field control as desired. The MM demonstrates excellent performance of scattering manipulations from 5700 to 8000 Hz in the acoustic region and 5.80–6.15 GHz in the microwave region. The bifunctional MM is verified through full-wave simulations and experimental measurements with good agreement, which stands out as a powerful tool for related applications in the future.